[PATCH v4 1/2] dt-bindings: media: imx8-jpeg: Add clocks entries

Mirela Rabulea mirela.rabulea at nxp.com
Sun Apr 7 20:07:33 PDT 2024


From: Fabio Estevam <festevam at gmail.com>

The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs need
the PER and IPG clocks to be functional, so add the clock entries.

This also fixes the following schema warning:

imx8qm-apalis-eval.dtb: jpegdec at 58400000: 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
        from schema $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#

Signed-off-by: Fabio Estevam <festevam at denx.de>
Signed-off-by: Mirela Rabulea <mirela.rabulea at nxp.com>
---

Changes since v3:
- Add items for clocks (per Krzysztof's feddback)
- Add description for clocks (per Conor's feddback to the other similar patch from Alexander)
- Add "media:" to the subject
- Add Mirela's signed-off
- For the similar patches that were sent for this issue, should Co-developed-by/Signed-off-by be added? Alexander Stein? Frank Li?

Changes since v2:
- Remove clock-names. (Mirela)

 .../devicetree/bindings/media/nxp,imx8-jpeg.yaml   | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 3d9d1db37040..cc040feb77d7 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -31,6 +31,14 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    description:
+      The JPEG decoder/encoder requires two clocks for it's wrapper (AXI and APB),
+      and one clock for it's core engine (AXI, same source as for the wrapper)
+    items:
+      - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per)
+      - description: IP bus clock for register access (ipg)
+
   interrupts:
     description: |
       There are 4 slots available in the IP, which the driver may use
@@ -49,6 +57,7 @@ properties:
 required:
   - compatible
   - reg
+  - clocks
   - interrupts
   - power-domains
 
@@ -56,12 +65,15 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/firmware/imx/rsrc.h>
 
     jpegdec: jpegdec at 58400000 {
         compatible = "nxp,imx8qxp-jpgdec";
         reg = <0x58400000 0x00050000 >;
+        clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+                 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
         interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
@@ -76,6 +88,8 @@ examples:
     jpegenc: jpegenc at 58450000 {
         compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
         reg = <0x58450000 0x00050000 >;
+        clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+                 <&img_jpeg__lpcg IMX_LPCG_CLK_4>;
         interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.25.1




More information about the linux-arm-kernel mailing list