[RFC PATCH v2 4/5] clk: meson: a1: add the audio clock controller driver

Jan Dakinevich jan.dakinevich at salutedevices.com
Sun Apr 7 18:07:53 PDT 2024



On 4/2/24 18:11, Jerome Brunet wrote:
> 
> On Thu 28 Mar 2024 at 04:08, Jan Dakinevich <jan.dakinevich at salutedevices.com> wrote:
> 
>> This controller provides clocks and reset functionality for audio
>> peripherals on Amlogic A1 SoC family.
>>
>> The driver is almost identical to 'axg-audio', however it would be better
>> to keep it separate due to following reasons:
>>
>>  - significant amount of bits has another definition. I will bring there
>>    a mess of new defines with A1_ suffixes.
>>
>>  - registers of this controller are located in two separate regions. It
>>    will give a lot of complications for 'axg-audio' to support this.
>>
>> Signed-off-by: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> ---
>>  drivers/clk/meson/Kconfig    |  13 +
>>  drivers/clk/meson/Makefile   |   1 +
>>  drivers/clk/meson/a1-audio.c | 624 +++++++++++++++++++++++++++++++++++
>>  drivers/clk/meson/a1-audio.h |  45 +++
>>  4 files changed, 683 insertions(+)
>>  create mode 100644 drivers/clk/meson/a1-audio.c
>>  create mode 100644 drivers/clk/meson/a1-audio.h
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index d6a2fa5f7e88..80c4a18c83d2 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -133,6 +133,19 @@ config COMMON_CLK_A1_PERIPHERALS
>>  	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
>>  	  controller to work.
>>  
>> +config COMMON_CLK_A1_AUDIO
>> +	tristate "Amlogic A1 SoC Audio clock controller support"
>> +	depends on ARM64
>> +	select COMMON_CLK_MESON_REGMAP
>> +	select COMMON_CLK_MESON_CLKC_UTILS
>> +	select COMMON_CLK_MESON_PHASE
>> +	select COMMON_CLK_MESON_SCLK_DIV
>> +	select COMMON_CLK_MESON_AUDIO_RSTC
>> +	help
>> +	  Support for the Audio clock controller on Amlogic A113L based
>> +	  device, A1 SoC Family. Say Y if you want A1 Audio clock controller
>> +	  to work.
>> +
>>  config COMMON_CLK_G12A
>>  	tristate "G12 and SM1 SoC clock controllers support"
>>  	depends on ARM64
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index 88d94921a4dc..4968fc7ad555 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
>>  obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>  obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>>  obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>> +obj-$(CONFIG_COMMON_CLK_A1_AUDIO) += a1-audio.o
>>  obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>>  obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>>  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>> diff --git a/drivers/clk/meson/a1-audio.c b/drivers/clk/meson/a1-audio.c
>> new file mode 100644
>> index 000000000000..bd2b6dde75d4
>> --- /dev/null
>> +++ b/drivers/clk/meson/a1-audio.c
>> @@ -0,0 +1,624 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
>> + *
>> + * Author: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/init.h>
>> +#include <linux/of_device.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/reset-controller.h>
>> +#include <linux/slab.h>
>> +
>> +#include "meson-clkc-utils.h"
>> +#include "meson-audio-rstc.h"
>> +#include "meson-audio.h"
>> +#include "clk-regmap.h"
>> +#include "clk-phase.h"
>> +#include "sclk-div.h"
>> +#include "a1-audio.h"
>> +
>> +static const struct clk_parent_data a1_pclk_pdata[] = {
>> +	{ .fw_name = "pclk" },
>> +};
> 
> Shouldn't you go through AUD2_CLKID_AUDIOTOP instead ?
> 
>> +
>> +#define AUD_PCLK_GATE(_name, _reg, _bit) {				\
>> +	.data = &(struct clk_regmap_gate_data){				\
>> +		.offset = (_reg),					\
>> +		.bit_idx = (_bit),					\
>> +	},								\
>> +	.hw.init = &(struct clk_init_data) {				\
>> +		.name = "aud_"#_name,					\
>> +		.ops = &clk_regmap_gate_ops,				\
>> +		.parent_data = a1_pclk_pdata,				\
>> +		.num_parents = 1,					\
>> +	},								\
>> +}
>> +
>> +struct clk_regmap aud_ddr_arb =
>> +	AUD_PCLK_GATE(ddr_arb, AUDIO_CLK_GATE_EN0, 0);
>> +struct clk_regmap aud_tdmin_a =
>> +	AUD_PCLK_GATE(tdmin_a, AUDIO_CLK_GATE_EN0, 1);
>> +struct clk_regmap aud_tdmin_b =
>> +	AUD_PCLK_GATE(tdmin_b, AUDIO_CLK_GATE_EN0, 2);
>> +struct clk_regmap aud_tdmin_lb =
>> +	AUD_PCLK_GATE(tdmin_lb, AUDIO_CLK_GATE_EN0, 3);
>> +struct clk_regmap aud_loopback =
>> +	AUD_PCLK_GATE(loopback, AUDIO_CLK_GATE_EN0, 4);
>> +struct clk_regmap aud_tdmout_a =
>> +	AUD_PCLK_GATE(tdmout_a, AUDIO_CLK_GATE_EN0, 5);
>> +struct clk_regmap aud_tdmout_b =
>> +	AUD_PCLK_GATE(tdmout_b, AUDIO_CLK_GATE_EN0, 6);
>> +struct clk_regmap aud_frddr_a =
>> +	AUD_PCLK_GATE(frddr_a, AUDIO_CLK_GATE_EN0, 7);
>> +struct clk_regmap aud_frddr_b =
>> +	AUD_PCLK_GATE(frddr_b, AUDIO_CLK_GATE_EN0, 8);
>> +struct clk_regmap aud_toddr_a =
>> +	AUD_PCLK_GATE(toddr_a, AUDIO_CLK_GATE_EN0, 9);
>> +struct clk_regmap aud_toddr_b =
>> +	AUD_PCLK_GATE(toddr_b, AUDIO_CLK_GATE_EN0, 10);
>> +struct clk_regmap aud_spdifin =
>> +	AUD_PCLK_GATE(spdifin, AUDIO_CLK_GATE_EN0, 11);
>> +struct clk_regmap aud_resample =
>> +	AUD_PCLK_GATE(resample, AUDIO_CLK_GATE_EN0, 12);
>> +struct clk_regmap aud_eqdrc =
>> +	AUD_PCLK_GATE(eqdrc, AUDIO_CLK_GATE_EN0, 13);
>> +struct clk_regmap aud_audiolocker =
>> +	AUD_PCLK_GATE(audiolocker, AUDIO_CLK_GATE_EN0, 14);
>> +
>> +struct clk_regmap aud2_ddr_arb =
>> +	AUD_PCLK_GATE(2_ddr_arb, AUDIO2_CLK_GATE_EN0, 0);
>> +struct clk_regmap aud2_pdm =
>> +	AUD_PCLK_GATE(2_pdm, AUDIO2_CLK_GATE_EN0, 1);
>> +struct clk_regmap aud2_tdmin_vad =
>> +	AUD_PCLK_GATE(2_tdmin_vad, AUDIO2_CLK_GATE_EN0, 2);
>> +struct clk_regmap aud2_toddr_vad =
>> +	AUD_PCLK_GATE(2_toddr_vad, AUDIO2_CLK_GATE_EN0, 3);
>> +struct clk_regmap aud2_vad =
>> +	AUD_PCLK_GATE(2_vad, AUDIO2_CLK_GATE_EN0, 4);
>> +struct clk_regmap aud2_audiotop =
>> +	AUD_PCLK_GATE(2_audiotop, AUDIO2_CLK_GATE_EN0, 7);
>> +
>> +static const struct clk_parent_data a1_mst_pdata[] = {
>> +	{ .fw_name = "dds_in" },
>> +	{ .fw_name = "fclk_div2" },
>> +	{ .fw_name = "fclk_div3" },
>> +	{ .fw_name = "hifi_pll" },
>> +	{ .fw_name = "xtal" },
>> +};
>> +
>> +#define AUD_MST_MCLK_MUX(_name, _reg)					\
>> +	AUD_MUX(_name##_sel, _reg, 0x7, 24, CLK_MUX_ROUND_CLOSEST,	\
>> +		a1_mst_pdata, 0)
>> +#define AUD_MST_MCLK_DIV(_name, _reg)					\
>> +	AUD_DIV(_name##_div, _reg, 0, 16, CLK_DIVIDER_ROUND_CLOSEST,	\
>> +		aud_##_name##_sel, CLK_SET_RATE_PARENT)
>> +#define AUD_MST_MCLK_GATE(_name, _reg)					\
>> +	AUD_GATE(_name, _reg, 31, aud_##_name##_div,			\
>> +		 CLK_SET_RATE_PARENT)
>> +
>> +struct clk_regmap aud_mst_a_mclk_mux =
>> +	AUD_MST_MCLK_MUX(mst_a_mclk, AUDIO_MCLK_A_CTRL);
>> +struct clk_regmap aud_mst_a_mclk_div =
>> +	AUD_MST_MCLK_DIV(mst_a_mclk, AUDIO_MCLK_A_CTRL);
>> +struct clk_regmap aud_mst_a_mclk =
>> +	AUD_MST_MCLK_GATE(mst_a_mclk, AUDIO_MCLK_A_CTRL);
>> +
>> +struct clk_regmap aud_mst_b_mclk_mux =
>> +	AUD_MST_MCLK_MUX(mst_b_mclk, AUDIO_MCLK_B_CTRL);
>> +struct clk_regmap aud_mst_b_mclk_div =
>> +	AUD_MST_MCLK_DIV(mst_b_mclk, AUDIO_MCLK_B_CTRL);
>> +struct clk_regmap aud_mst_b_mclk =
>> +	AUD_MST_MCLK_GATE(mst_b_mclk, AUDIO_MCLK_B_CTRL);
>> +
>> +struct clk_regmap aud_mst_c_mclk_mux =
>> +	AUD_MST_MCLK_MUX(mst_c_mclk, AUDIO_MCLK_C_CTRL);
>> +struct clk_regmap aud_mst_c_mclk_div =
>> +	AUD_MST_MCLK_DIV(mst_c_mclk, AUDIO_MCLK_C_CTRL);
>> +struct clk_regmap aud_mst_c_mclk =
>> +	AUD_MST_MCLK_GATE(mst_c_mclk, AUDIO_MCLK_C_CTRL);
>> +
>> +struct clk_regmap aud_mst_d_mclk_mux =
>> +	AUD_MST_MCLK_MUX(mst_d_mclk, AUDIO_MCLK_D_CTRL);
>> +struct clk_regmap aud_mst_d_mclk_div =
>> +	AUD_MST_MCLK_DIV(mst_d_mclk, AUDIO_MCLK_D_CTRL);
>> +struct clk_regmap aud_mst_d_mclk =
>> +	AUD_MST_MCLK_GATE(mst_d_mclk, AUDIO_MCLK_D_CTRL);
>> +
>> +struct clk_regmap aud_spdifin_clk_mux =
>> +	AUD_MST_MCLK_MUX(spdifin_clk, AUDIO_CLK_SPDIFIN_CTRL);
>> +struct clk_regmap aud_spdifin_clk_div =
>> +	AUD_MST_MCLK_DIV(spdifin_clk, AUDIO_CLK_SPDIFIN_CTRL);
>> +struct clk_regmap aud_spdifin_clk =
>> +	AUD_MST_MCLK_GATE(spdifin_clk, AUDIO_CLK_SPDIFIN_CTRL);
>> +
>> +struct clk_regmap aud_eqdrc_clk_mux =
>> +	AUD_MST_MCLK_MUX(eqdrc_clk, AUDIO_CLK_EQDRC_CTRL);
>> +struct clk_regmap aud_eqdrc_clk_div =
>> +	AUD_MST_MCLK_DIV(eqdrc_clk, AUDIO_CLK_EQDRC_CTRL);
>> +struct clk_regmap aud_eqdrc_clk =
>> +	AUD_MST_MCLK_GATE(eqdrc_clk, AUDIO_CLK_EQDRC_CTRL);
>> +
>> +struct clk_regmap aud_resample_clk_mux =
>> +	AUD_MUX(resample_clk_sel, AUDIO_CLK_RESAMPLE_CTRL, 0xf, 24,
>> +		CLK_MUX_ROUND_CLOSEST, a1_mst_pdata, CLK_SET_RATE_PARENT);
>> +struct clk_regmap aud_resample_clk_div =
>> +	AUD_DIV(resample_clk_div, AUDIO_CLK_RESAMPLE_CTRL, 0, 8,
>> +		CLK_DIVIDER_ROUND_CLOSEST, resample_clk_sel, CLK_SET_RATE_PARENT);
>> +struct clk_regmap aud_resample_clk =
>> +	AUD_GATE(resample_clk, AUDIO_CLK_RESAMPLE_CTRL, 31,
>> +		 resample_clk_div, CLK_SET_RATE_PARENT);
>> +
>> +struct clk_regmap aud_locker_in_clk_mux =
>> +	AUD_MUX(locker_in_clk_sel, AUDIO_CLK_LOCKER_CTRL, 0xf, 8,
>> +		CLK_MUX_ROUND_CLOSEST, a1_mst_pdata, CLK_SET_RATE_PARENT);
>> +struct clk_regmap aud_locker_in_clk_div =
>> +	AUD_DIV(locker_in_clk_div, AUDIO_CLK_LOCKER_CTRL, 0, 8,
>> +		CLK_DIVIDER_ROUND_CLOSEST, locker_in_clk_sel, CLK_SET_RATE_PARENT);
>> +struct clk_regmap aud_locker_in_clk =
>> +	AUD_GATE(locker_in_clk, AUDIO_CLK_LOCKER_CTRL, 15,
>> +		 locker_in_clk_div, CLK_SET_RATE_PARENT);
>> +
>> +struct clk_regmap aud_locker_out_clk_mux =
>> +	AUD_MUX(locker_out_clk_sel, AUDIO_CLK_LOCKER_CTRL, 0xf, 24,
>> +		CLK_MUX_ROUND_CLOSEST, a1_mst_pdata, CLK_SET_RATE_PARENT);
>> +struct clk_regmap aud_locker_out_clk_div =
>> +	AUD_DIV(locker_out_clk_div, AUDIO_CLK_LOCKER_CTRL, 16, 8,
>> +		CLK_DIVIDER_ROUND_CLOSEST, locker_out_clk_sel, CLK_SET_RATE_PARENT);
>> +struct clk_regmap aud_locker_out_clk =
>> +	AUD_GATE(locker_out_clk, AUDIO_CLK_LOCKER_CTRL, 31,
>> +		 locker_out_clk_div, CLK_SET_RATE_PARENT);
>> +
>> +struct clk_regmap aud2_vad_mclk_mux =
>> +	AUD_MST_MCLK_MUX(2_vad_mclk, AUDIO2_MCLK_VAD_CTRL);
>> +struct clk_regmap aud2_vad_mclk_div =
>> +	AUD_MST_MCLK_DIV(2_vad_mclk, AUDIO2_MCLK_VAD_CTRL);
>> +struct clk_regmap aud2_vad_mclk =
>> +	AUD_MST_MCLK_GATE(2_vad_mclk, AUDIO2_MCLK_VAD_CTRL);
>> +
>> +struct clk_regmap aud2_vad_clk_mux =
>> +	AUD_MST_MCLK_MUX(2_vad_clk, AUDIO2_CLK_VAD_CTRL);
>> +struct clk_regmap aud2_vad_clk_div =
>> +	AUD_MST_MCLK_DIV(2_vad_clk, AUDIO2_CLK_VAD_CTRL);
>> +struct clk_regmap aud2_vad_clk =
>> +	AUD_MST_MCLK_GATE(2_vad_clk, AUDIO2_CLK_VAD_CTRL);
>> +
>> +struct clk_regmap aud2_pdm_dclk_mux =
>> +	AUD_MST_MCLK_MUX(2_pdm_dclk, AUDIO2_CLK_PDMIN_CTRL0);
>> +struct clk_regmap aud2_pdm_dclk_div =
>> +	AUD_MST_MCLK_DIV(2_pdm_dclk, AUDIO2_CLK_PDMIN_CTRL0);
>> +struct clk_regmap aud2_pdm_dclk =
>> +	AUD_MST_MCLK_GATE(2_pdm_dclk, AUDIO2_CLK_PDMIN_CTRL0);
>> +
>> +struct clk_regmap aud2_pdm_sysclk_mux =
>> +	AUD_MST_MCLK_MUX(2_pdm_sysclk, AUDIO2_CLK_PDMIN_CTRL1);
>> +struct clk_regmap aud2_pdm_sysclk_div =
>> +	AUD_MST_MCLK_DIV(2_pdm_sysclk, AUDIO2_CLK_PDMIN_CTRL1);
>> +struct clk_regmap aud2_pdm_sysclk =
>> +	AUD_MST_MCLK_GATE(2_pdm_sysclk, AUDIO2_CLK_PDMIN_CTRL1);
>> +
>> +#define AUD_MST_SCLK_PRE_EN(_name, _reg, _pname)			\
>> +	AUD_GATE(_name##_pre_en, _reg, 31,				\
>> +		 aud_##_pname, 0)
>> +#define AUD_MST_SCLK_DIV(_name, _reg)					\
>> +	AUD_SCLK_DIV(_name##_div, _reg, 20, 10, 0, 0,			\
>> +		     aud_##_name##_pre_en, CLK_SET_RATE_PARENT)
>> +#define AUD_MST_SCLK_POST_EN(_name, _reg)				\
>> +	AUD_GATE(_name##_post_en, _reg, 30,				\
>> +		 aud_##_name##_div, CLK_SET_RATE_PARENT)
>> +#define AUD_MST_SCLK(_name, _reg)					\
>> +	AUD_TRIPHASE(_name, _reg, 1, 0, 2, 4,				\
>> +		     aud_##_name##_post_en, CLK_SET_RATE_PARENT)
>> +
>> +struct clk_regmap aud_mst_a_sclk_pre_en =
>> +	AUD_MST_SCLK_PRE_EN(mst_a_sclk, AUDIO_MST_A_SCLK_CTRL0, mst_a_mclk);
>> +struct clk_regmap aud_mst_a_sclk_div =
>> +	AUD_MST_SCLK_DIV(mst_a_sclk, AUDIO_MST_A_SCLK_CTRL0);
>> +struct clk_regmap aud_mst_a_sclk_post_en =
>> +	AUD_MST_SCLK_POST_EN(mst_a_sclk, AUDIO_MST_A_SCLK_CTRL0);
>> +struct clk_regmap aud_mst_a_sclk =
>> +	AUD_MST_SCLK(mst_a_sclk, AUDIO_MST_A_SCLK_CTRL1);
>> +
>> +struct clk_regmap aud_mst_b_sclk_pre_en =
>> +	AUD_MST_SCLK_PRE_EN(mst_b_sclk, AUDIO_MST_B_SCLK_CTRL0, mst_b_mclk);
>> +struct clk_regmap aud_mst_b_sclk_div =
>> +	AUD_MST_SCLK_DIV(mst_b_sclk, AUDIO_MST_B_SCLK_CTRL0);
>> +struct clk_regmap aud_mst_b_sclk_post_en =
>> +	AUD_MST_SCLK_POST_EN(mst_b_sclk, AUDIO_MST_B_SCLK_CTRL0);
>> +struct clk_regmap aud_mst_b_sclk =
>> +	AUD_MST_SCLK(mst_b_sclk, AUDIO_MST_B_SCLK_CTRL1);
>> +
>> +struct clk_regmap aud_mst_c_sclk_pre_en =
>> +	AUD_MST_SCLK_PRE_EN(mst_c_sclk, AUDIO_MST_C_SCLK_CTRL0, mst_c_mclk);
>> +struct clk_regmap aud_mst_c_sclk_div =
>> +	AUD_MST_SCLK_DIV(mst_c_sclk, AUDIO_MST_C_SCLK_CTRL0);
>> +struct clk_regmap aud_mst_c_sclk_post_en =
>> +	AUD_MST_SCLK_POST_EN(mst_c_sclk, AUDIO_MST_C_SCLK_CTRL0);
>> +struct clk_regmap aud_mst_c_sclk =
>> +	AUD_MST_SCLK(mst_c_sclk, AUDIO_MST_C_SCLK_CTRL1);
>> +
>> +struct clk_regmap aud_mst_d_sclk_pre_en =
>> +	AUD_MST_SCLK_PRE_EN(mst_d_sclk, AUDIO_MST_D_SCLK_CTRL0, mst_d_mclk);
>> +struct clk_regmap aud_mst_d_sclk_div =
>> +	AUD_MST_SCLK_DIV(mst_d_sclk, AUDIO_MST_D_SCLK_CTRL0);
>> +struct clk_regmap aud_mst_d_sclk_post_en =
>> +	AUD_MST_SCLK_POST_EN(mst_d_sclk, AUDIO_MST_D_SCLK_CTRL0);
>> +struct clk_regmap aud_mst_d_sclk =
>> +	AUD_MST_SCLK(mst_d_sclk, AUDIO_MST_D_SCLK_CTRL1);
>> +
>> +#define AUD_MST_LRCLK_DIV(_name, _reg, _pname)				\
>> +	AUD_SCLK_DIV(_name##_div, _reg, 0, 10, 10, 10,			\
>> +		     aud_##_pname, 0)
>> +#define AUD_MST_LRCLK(_name, _reg)					\
>> +	AUD_TRIPHASE(_name, _reg, 1, 1, 3, 5,				\
>> +		     aud_##_name##_div, CLK_SET_RATE_PARENT)
>> +
>> +struct clk_regmap aud_mst_a_lrclk_div =
>> +	AUD_MST_LRCLK_DIV(mst_a_lrclk, AUDIO_MST_A_SCLK_CTRL0, mst_a_sclk_post_en);
>> +struct clk_regmap aud_mst_a_lrclk =
>> +	AUD_MST_LRCLK(mst_a_lrclk, AUDIO_MST_A_SCLK_CTRL1);
>> +
>> +struct clk_regmap aud_mst_b_lrclk_div =
>> +	AUD_MST_LRCLK_DIV(mst_b_lrclk, AUDIO_MST_B_SCLK_CTRL0, mst_b_sclk_post_en);
>> +struct clk_regmap aud_mst_b_lrclk =
>> +	AUD_MST_LRCLK(mst_b_lrclk, AUDIO_MST_B_SCLK_CTRL1);
>> +
>> +struct clk_regmap aud_mst_c_lrclk_div =
>> +	AUD_MST_LRCLK_DIV(mst_c_lrclk, AUDIO_MST_C_SCLK_CTRL0, mst_c_sclk_post_en);
>> +struct clk_regmap aud_mst_c_lrclk =
>> +	AUD_MST_LRCLK(mst_c_lrclk, AUDIO_MST_C_SCLK_CTRL1);
>> +
>> +struct clk_regmap aud_mst_d_lrclk_div =
>> +	AUD_MST_LRCLK_DIV(mst_d_lrclk, AUDIO_MST_D_SCLK_CTRL0, mst_d_sclk_post_en);
>> +struct clk_regmap aud_mst_d_lrclk =
>> +	AUD_MST_LRCLK(mst_d_lrclk, AUDIO_MST_D_SCLK_CTRL1);
>> +
>> +static const struct clk_parent_data a1_mst_sclk_pdata[] = {
>> +	{ .hw = &aud_mst_a_sclk.hw, .index = -1 },
>> +	{ .hw = &aud_mst_b_sclk.hw, .index = -1 },
>> +	{ .hw = &aud_mst_c_sclk.hw, .index = -1 },
>> +	{ .hw = &aud_mst_d_sclk.hw, .index = -1 },
>> +	{ .fw_name = "slv_sclk0" },
>> +	{ .fw_name = "slv_sclk1" },
>> +	{ .fw_name = "slv_sclk2" },
>> +	{ .fw_name = "slv_sclk3" },
>> +	{ .fw_name = "slv_sclk4" },
>> +	{ .fw_name = "slv_sclk5" },
>> +	{ .fw_name = "slv_sclk6" },
>> +	{ .fw_name = "slv_sclk7" },
>> +	{ .fw_name = "slv_sclk8" },
>> +	{ .fw_name = "slv_sclk9" },
>> +};
>> +
>> +static const struct clk_parent_data a1_mst_lrclk_pdata[] = {
>> +	{ .hw = &aud_mst_a_lrclk.hw, .index = -1 },
>> +	{ .hw = &aud_mst_b_lrclk.hw, .index = -1 },
>> +	{ .hw = &aud_mst_c_lrclk.hw, .index = -1 },
>> +	{ .hw = &aud_mst_d_lrclk.hw, .index = -1 },
>> +	{ .fw_name = "slv_lrclk0" },
>> +	{ .fw_name = "slv_lrclk1" },
>> +	{ .fw_name = "slv_lrclk2" },
>> +	{ .fw_name = "slv_lrclk3" },
>> +	{ .fw_name = "slv_lrclk4" },
>> +	{ .fw_name = "slv_lrclk5" },
>> +	{ .fw_name = "slv_lrclk6" },
>> +	{ .fw_name = "slv_lrclk7" },
>> +	{ .fw_name = "slv_lrclk8" },
>> +	{ .fw_name = "slv_lrclk9" },
>> +};
>> +
>> +#define AUD_TDM_SCLK_MUX(_name, _reg)					\
>> +	AUD_MUX(_name##_sel, _reg, 0xf, 24,				\
>> +		CLK_MUX_ROUND_CLOSEST, a1_mst_sclk_pdata, 0)
>> +#define AUD_TDM_SCLK_PRE_EN(_name, _reg)				\
>> +	AUD_GATE(_name##_pre_en, _reg, 31,				\
>> +		 aud_##_name##_sel, CLK_SET_RATE_PARENT)
>> +#define AUD_TDM_SCLK_POST_EN(_name, _reg)				\
>> +	AUD_GATE(_name##_post_en, _reg, 30,				\
>> +		 aud_##_name##_pre_en, CLK_SET_RATE_PARENT)
>> +#define AUD_TDM_SCLK_WS(_name, _reg)					\
>> +	AUD_SCLK_WS(_name, _reg, 1, 29, 28,				\
>> +		    aud_##_name##_post_en,				\
>> +		    CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)
>> +
>> +#define AUD_TDM_LRLCK(_name, _reg)					\
>> +	AUD_MUX(_name, _reg, 0xf, 20,					\
>> +		CLK_MUX_ROUND_CLOSEST, a1_mst_lrclk_pdata,		\
>> +		CLK_SET_RATE_PARENT)
>> +
>> +struct clk_regmap aud_tdmin_a_sclk_mux =
>> +	AUD_TDM_SCLK_MUX(tdmin_a_sclk, AUDIO_CLK_TDMIN_A_CTRL);
>> +struct clk_regmap aud_tdmin_a_sclk_pre_en =
>> +	AUD_TDM_SCLK_PRE_EN(tdmin_a_sclk, AUDIO_CLK_TDMIN_A_CTRL);
>> +struct clk_regmap aud_tdmin_a_sclk_post_en =
>> +	AUD_TDM_SCLK_POST_EN(tdmin_a_sclk, AUDIO_CLK_TDMIN_A_CTRL);
>> +struct clk_regmap aud_tdmin_a_sclk =
>> +	AUD_TDM_SCLK_WS(tdmin_a_sclk, AUDIO_CLK_TDMIN_A_CTRL);
>> +struct clk_regmap aud_tdmin_a_lrclk =
>> +	AUD_TDM_LRLCK(tdmin_a_lrclk, AUDIO_CLK_TDMIN_A_CTRL);
>> +
>> +struct clk_regmap aud_tdmin_b_sclk_mux =
>> +	AUD_TDM_SCLK_MUX(tdmin_b_sclk, AUDIO_CLK_TDMIN_B_CTRL);
>> +struct clk_regmap aud_tdmin_b_sclk_pre_en =
>> +	AUD_TDM_SCLK_PRE_EN(tdmin_b_sclk, AUDIO_CLK_TDMIN_B_CTRL);
>> +struct clk_regmap aud_tdmin_b_sclk_post_en =
>> +	AUD_TDM_SCLK_POST_EN(tdmin_b_sclk, AUDIO_CLK_TDMIN_B_CTRL);
>> +struct clk_regmap aud_tdmin_b_sclk =
>> +	AUD_TDM_SCLK_WS(tdmin_b_sclk, AUDIO_CLK_TDMIN_B_CTRL);
>> +struct clk_regmap aud_tdmin_b_lrclk =
>> +	AUD_TDM_LRLCK(tdmin_b_lrclk, AUDIO_CLK_TDMIN_B_CTRL);
>> +
>> +struct clk_regmap aud_tdmin_lb_sclk_mux =
>> +	AUD_TDM_SCLK_MUX(tdmin_lb_sclk, AUDIO_CLK_TDMIN_LB_CTRL);
>> +struct clk_regmap aud_tdmin_lb_sclk_pre_en =
>> +	AUD_TDM_SCLK_PRE_EN(tdmin_lb_sclk, AUDIO_CLK_TDMIN_LB_CTRL);
>> +struct clk_regmap aud_tdmin_lb_sclk_post_en =
>> +	AUD_TDM_SCLK_POST_EN(tdmin_lb_sclk, AUDIO_CLK_TDMIN_LB_CTRL);
>> +struct clk_regmap aud_tdmin_lb_sclk =
>> +	AUD_TDM_SCLK_WS(tdmin_lb_sclk, AUDIO_CLK_TDMIN_LB_CTRL);
>> +struct clk_regmap aud_tdmin_lb_lrclk =
>> +	AUD_TDM_LRLCK(tdmin_lb_lrclk, AUDIO_CLK_TDMIN_LB_CTRL);
>> +
>> +struct clk_regmap aud_tdmout_a_sclk_mux =
>> +	AUD_TDM_SCLK_MUX(tdmout_a_sclk, AUDIO_CLK_TDMOUT_A_CTRL);
>> +struct clk_regmap aud_tdmout_a_sclk_pre_en =
>> +	AUD_TDM_SCLK_PRE_EN(tdmout_a_sclk, AUDIO_CLK_TDMOUT_A_CTRL);
>> +struct clk_regmap aud_tdmout_a_sclk_post_en =
>> +	AUD_TDM_SCLK_POST_EN(tdmout_a_sclk, AUDIO_CLK_TDMOUT_A_CTRL);
>> +struct clk_regmap aud_tdmout_a_sclk =
>> +	AUD_TDM_SCLK_WS(tdmout_a_sclk, AUDIO_CLK_TDMOUT_A_CTRL);
>> +struct clk_regmap aud_tdmout_a_lrclk =
>> +	AUD_TDM_LRLCK(tdmout_a_lrclk, AUDIO_CLK_TDMOUT_A_CTRL);
>> +
>> +struct clk_regmap aud_tdmout_b_sclk_mux =
>> +	AUD_TDM_SCLK_MUX(tdmout_b_sclk, AUDIO_CLK_TDMOUT_B_CTRL);
>> +struct clk_regmap aud_tdmout_b_sclk_pre_en =
>> +	AUD_TDM_SCLK_PRE_EN(tdmout_b_sclk, AUDIO_CLK_TDMOUT_B_CTRL);
>> +struct clk_regmap aud_tdmout_b_sclk_post_en =
>> +	AUD_TDM_SCLK_POST_EN(tdmout_b_sclk, AUDIO_CLK_TDMOUT_B_CTRL);
>> +struct clk_regmap aud_tdmout_b_sclk =
>> +	AUD_TDM_SCLK_WS(tdmout_b_sclk, AUDIO_CLK_TDMOUT_B_CTRL);
>> +struct clk_regmap aud_tdmout_b_lrclk =
>> +	AUD_TDM_LRLCK(tdmout_b_lrclk, AUDIO_CLK_TDMOUT_B_CTRL);
>> +
>> +static struct clk_hw *a1_audio_hw_clks[] = {
>> +	[AUD_CLKID_DDR_ARB]		= &aud_ddr_arb.hw,
>> +	[AUD_CLKID_TDMIN_A]		= &aud_tdmin_a.hw,
>> +	[AUD_CLKID_TDMIN_B]		= &aud_tdmin_b.hw,
>> +	[AUD_CLKID_TDMIN_LB]		= &aud_tdmin_lb.hw,
>> +	[AUD_CLKID_LOOPBACK]		= &aud_loopback.hw,
>> +	[AUD_CLKID_TDMOUT_A]		= &aud_tdmout_a.hw,
>> +	[AUD_CLKID_TDMOUT_B]		= &aud_tdmout_b.hw,
>> +	[AUD_CLKID_FRDDR_A]		= &aud_frddr_a.hw,
>> +	[AUD_CLKID_FRDDR_B]		= &aud_frddr_b.hw,
>> +	[AUD_CLKID_TODDR_A]		= &aud_toddr_a.hw,
>> +	[AUD_CLKID_TODDR_B]		= &aud_toddr_b.hw,
>> +	[AUD_CLKID_SPDIFIN]		= &aud_spdifin.hw,
>> +	[AUD_CLKID_RESAMPLE]		= &aud_resample.hw,
>> +	[AUD_CLKID_EQDRC]		= &aud_eqdrc.hw,
>> +	[AUD_CLKID_LOCKER]		= &aud_audiolocker.hw,
>> +	[AUD_CLKID_MST_A_MCLK_SEL]	= &aud_mst_a_mclk_mux.hw,
>> +	[AUD_CLKID_MST_A_MCLK_DIV]	= &aud_mst_a_mclk_div.hw,
>> +	[AUD_CLKID_MST_A_MCLK]		= &aud_mst_a_mclk.hw,
>> +	[AUD_CLKID_MST_B_MCLK_SEL]	= &aud_mst_b_mclk_mux.hw,
>> +	[AUD_CLKID_MST_B_MCLK_DIV]	= &aud_mst_b_mclk_div.hw,
>> +	[AUD_CLKID_MST_B_MCLK]		= &aud_mst_b_mclk.hw,
>> +	[AUD_CLKID_MST_C_MCLK_SEL]	= &aud_mst_c_mclk_mux.hw,
>> +	[AUD_CLKID_MST_C_MCLK_DIV]	= &aud_mst_c_mclk_div.hw,
>> +	[AUD_CLKID_MST_C_MCLK]		= &aud_mst_c_mclk.hw,
>> +	[AUD_CLKID_MST_D_MCLK_SEL]	= &aud_mst_d_mclk_mux.hw,
>> +	[AUD_CLKID_MST_D_MCLK_DIV]	= &aud_mst_d_mclk_div.hw,
>> +	[AUD_CLKID_MST_D_MCLK]		= &aud_mst_d_mclk.hw,
>> +	[AUD_CLKID_RESAMPLE_CLK_SEL]	= &aud_resample_clk_mux.hw,
>> +	[AUD_CLKID_RESAMPLE_CLK_DIV]	= &aud_resample_clk_div.hw,
>> +	[AUD_CLKID_RESAMPLE_CLK]	= &aud_resample_clk.hw,
>> +	[AUD_CLKID_LOCKER_IN_CLK_SEL]	= &aud_locker_in_clk_mux.hw,
>> +	[AUD_CLKID_LOCKER_IN_CLK_DIV]	= &aud_locker_in_clk_div.hw,
>> +	[AUD_CLKID_LOCKER_IN_CLK]	= &aud_locker_in_clk.hw,
>> +	[AUD_CLKID_LOCKER_OUT_CLK_SEL]	= &aud_locker_out_clk_mux.hw,
>> +	[AUD_CLKID_LOCKER_OUT_CLK_DIV]	= &aud_locker_out_clk_div.hw,
>> +	[AUD_CLKID_LOCKER_OUT_CLK]	= &aud_locker_out_clk.hw,
>> +	[AUD_CLKID_SPDIFIN_CLK_SEL]	= &aud_spdifin_clk_mux.hw,
>> +	[AUD_CLKID_SPDIFIN_CLK_DIV]	= &aud_spdifin_clk_div.hw,
>> +	[AUD_CLKID_SPDIFIN_CLK]		= &aud_spdifin_clk.hw,
>> +	[AUD_CLKID_EQDRC_CLK_SEL]	= &aud_eqdrc_clk_mux.hw,
>> +	[AUD_CLKID_EQDRC_CLK_DIV]	= &aud_eqdrc_clk_div.hw,
>> +	[AUD_CLKID_EQDRC_CLK]		= &aud_eqdrc_clk.hw,
>> +	[AUD_CLKID_MST_A_SCLK_PRE_EN]	= &aud_mst_a_sclk_pre_en.hw,
>> +	[AUD_CLKID_MST_A_SCLK_DIV]	= &aud_mst_a_sclk_div.hw,
>> +	[AUD_CLKID_MST_A_SCLK_POST_EN]	= &aud_mst_a_sclk_post_en.hw,
>> +	[AUD_CLKID_MST_A_SCLK]		= &aud_mst_a_sclk.hw,
>> +	[AUD_CLKID_MST_B_SCLK_PRE_EN]	= &aud_mst_b_sclk_pre_en.hw,
>> +	[AUD_CLKID_MST_B_SCLK_DIV]	= &aud_mst_b_sclk_div.hw,
>> +	[AUD_CLKID_MST_B_SCLK_POST_EN]	= &aud_mst_b_sclk_post_en.hw,
>> +	[AUD_CLKID_MST_B_SCLK]		= &aud_mst_b_sclk.hw,
>> +	[AUD_CLKID_MST_C_SCLK_PRE_EN]	= &aud_mst_c_sclk_pre_en.hw,
>> +	[AUD_CLKID_MST_C_SCLK_DIV]	= &aud_mst_c_sclk_div.hw,
>> +	[AUD_CLKID_MST_C_SCLK_POST_EN]	= &aud_mst_c_sclk_post_en.hw,
>> +	[AUD_CLKID_MST_C_SCLK]		= &aud_mst_c_sclk.hw,
>> +	[AUD_CLKID_MST_D_SCLK_PRE_EN]	= &aud_mst_d_sclk_pre_en.hw,
>> +	[AUD_CLKID_MST_D_SCLK_DIV]	= &aud_mst_d_sclk_div.hw,
>> +	[AUD_CLKID_MST_D_SCLK_POST_EN]	= &aud_mst_d_sclk_post_en.hw,
>> +	[AUD_CLKID_MST_D_SCLK]		= &aud_mst_d_sclk.hw,
>> +	[AUD_CLKID_MST_A_LRCLK_DIV]	= &aud_mst_a_lrclk_div.hw,
>> +	[AUD_CLKID_MST_A_LRCLK]		= &aud_mst_a_lrclk.hw,
>> +	[AUD_CLKID_MST_B_LRCLK_DIV]	= &aud_mst_b_lrclk_div.hw,
>> +	[AUD_CLKID_MST_B_LRCLK]		= &aud_mst_b_lrclk.hw,
>> +	[AUD_CLKID_MST_C_LRCLK_DIV]	= &aud_mst_c_lrclk_div.hw,
>> +	[AUD_CLKID_MST_C_LRCLK]		= &aud_mst_c_lrclk.hw,
>> +	[AUD_CLKID_MST_D_LRCLK_DIV]	= &aud_mst_d_lrclk_div.hw,
>> +	[AUD_CLKID_MST_D_LRCLK]		= &aud_mst_d_lrclk.hw,
>> +	[AUD_CLKID_TDMIN_A_SCLK_SEL]	= &aud_tdmin_a_sclk_mux.hw,
>> +	[AUD_CLKID_TDMIN_A_SCLK_PRE_EN]	= &aud_tdmin_a_sclk_pre_en.hw,
>> +	[AUD_CLKID_TDMIN_A_SCLK_POST_EN] = &aud_tdmin_a_sclk_post_en.hw,
>> +	[AUD_CLKID_TDMIN_A_SCLK]	= &aud_tdmin_a_sclk.hw,
>> +	[AUD_CLKID_TDMIN_A_LRCLK]	= &aud_tdmin_a_lrclk.hw,
>> +	[AUD_CLKID_TDMIN_B_SCLK_SEL]	= &aud_tdmin_b_sclk_mux.hw,
>> +	[AUD_CLKID_TDMIN_B_SCLK_PRE_EN]	= &aud_tdmin_b_sclk_pre_en.hw,
>> +	[AUD_CLKID_TDMIN_B_SCLK_POST_EN] = &aud_tdmin_b_sclk_post_en.hw,
>> +	[AUD_CLKID_TDMIN_B_SCLK]	= &aud_tdmin_b_sclk.hw,
>> +	[AUD_CLKID_TDMIN_B_LRCLK]	= &aud_tdmin_b_lrclk.hw,
>> +	[AUD_CLKID_TDMIN_LB_SCLK_SEL]	= &aud_tdmin_lb_sclk_mux.hw,
>> +	[AUD_CLKID_TDMIN_LB_SCLK_PRE_EN] = &aud_tdmin_lb_sclk_pre_en.hw,
>> +	[AUD_CLKID_TDMIN_LB_SCLK_POST_EN] = &aud_tdmin_lb_sclk_post_en.hw,
>> +	[AUD_CLKID_TDMIN_LB_SCLK]	= &aud_tdmin_lb_sclk.hw,
>> +	[AUD_CLKID_TDMIN_LB_LRCLK]	= &aud_tdmin_lb_lrclk.hw,
>> +	[AUD_CLKID_TDMOUT_A_SCLK_SEL]	= &aud_tdmout_a_sclk_mux.hw,
>> +	[AUD_CLKID_TDMOUT_A_SCLK_PRE_EN] = &aud_tdmout_a_sclk_pre_en.hw,
>> +	[AUD_CLKID_TDMOUT_A_SCLK_POST_EN] = &aud_tdmout_a_sclk_post_en.hw,
>> +	[AUD_CLKID_TDMOUT_A_SCLK]	= &aud_tdmout_a_sclk.hw,
>> +	[AUD_CLKID_TDMOUT_A_LRCLK]	= &aud_tdmout_a_lrclk.hw,
>> +	[AUD_CLKID_TDMOUT_B_SCLK_SEL]	= &aud_tdmout_b_sclk_mux.hw,
>> +	[AUD_CLKID_TDMOUT_B_SCLK_PRE_EN] = &aud_tdmout_b_sclk_pre_en.hw,
>> +	[AUD_CLKID_TDMOUT_B_SCLK_POST_EN] = &aud_tdmout_b_sclk_post_en.hw,
>> +	[AUD_CLKID_TDMOUT_B_SCLK]	= &aud_tdmout_b_sclk.hw,
>> +	[AUD_CLKID_TDMOUT_B_LRCLK]	= &aud_tdmout_b_lrclk.hw,
>> +};
>> +
>> +static struct clk_hw *a1_audio2_hw_clks[] = {
>> +	[AUD2_CLKID_DDR_ARB]		= &aud2_ddr_arb.hw,
>> +	[AUD2_CLKID_PDM]		= &aud2_pdm.hw,
>> +	[AUD2_CLKID_TDMIN_VAD]		= &aud2_tdmin_vad.hw,
>> +	[AUD2_CLKID_TODDR_VAD]		= &aud2_toddr_vad.hw,
>> +	[AUD2_CLKID_VAD]		= &aud2_vad.hw,
>> +	[AUD2_CLKID_AUDIOTOP]		= &aud2_audiotop.hw,
>> +	[AUD2_CLKID_VAD_MCLK_SEL]	= &aud2_vad_mclk_mux.hw,
>> +	[AUD2_CLKID_VAD_MCLK_DIV]	= &aud2_vad_mclk_div.hw,
>> +	[AUD2_CLKID_VAD_MCLK]		= &aud2_vad_mclk.hw,
>> +	[AUD2_CLKID_VAD_CLK_SEL]	= &aud2_vad_clk_mux.hw,
>> +	[AUD2_CLKID_VAD_CLK_DIV]	= &aud2_vad_clk_div.hw,
>> +	[AUD2_CLKID_VAD_CLK]		= &aud2_vad_clk.hw,
>> +	[AUD2_CLKID_PDM_DCLK_SEL]	= &aud2_pdm_dclk_mux.hw,
>> +	[AUD2_CLKID_PDM_DCLK_DIV]	= &aud2_pdm_dclk_div.hw,
>> +	[AUD2_CLKID_PDM_DCLK]		= &aud2_pdm_dclk.hw,
>> +	[AUD2_CLKID_PDM_SYSCLK_SEL]	= &aud2_pdm_sysclk_mux.hw,
>> +	[AUD2_CLKID_PDM_SYSCLK_DIV]	= &aud2_pdm_sysclk_div.hw,
>> +	[AUD2_CLKID_PDM_SYSCLK]		= &aud2_pdm_sysclk.hw,
>> +};
> 
> I think you already got that comment but audio2 is a terrible name.
>> Given that the 2nd controller is mostly about VAD (PDM is there only to
> feed it) and that it is just a name, I'd prefer something like a1_audio_vad.
>

Do you mean something like this?

static struct clk_hw *a1_audio_vad_hw_clks[] = {
	[AUD_CLKID_VAD_DDR_ARB]		= &aud_vad_ddr_arb.hw,
	[AUD_CLKID_VAD_PDM]		= &aud_vad_pdm.hw,
	[AUD_CLKID_VAD_TDMIN]		= &aud_vad_tdmin.hw,
	[AUD_CLKID_VAD_TODDR]		= &aud_vad_toddr.hw,
	[AUD_CLKID_VAD]			= &aud_vad.hw,
	...


>> +
>> +static int a1_register_clk(struct platform_device *pdev, struct regmap *map,
>> +			   struct clk_hw *hw)
>> +{
>> +	struct clk_regmap *clk = container_of(hw, struct clk_regmap, hw);
>> +
>> +	if (!hw)
>> +		return 0;
>> +
>> +	clk->map = map;
>> +
>> +	return devm_clk_hw_register(&pdev->dev, hw);
>> +}
> 
> Why do you have to do that and cannot do it like the rest of the
> modules ?
> 

Originally, it was used twice. But you're right, now it can be placed
into the loop in a1_audio_clkc_probe().

>> +
>> +struct a1_audio_data {
>> +	struct meson_clk_hw_data hw_clks;
>> +	int core_clkid;
>> +	const char *core_fwname;
>> +	unsigned int reset_offset;
>> +	unsigned int reset_num;
>> +};
>> +
>> +static const struct regmap_config a1_audio_regmap_cfg = {
>> +	.reg_bits = 32,
>> +	.val_bits = 32,
>> +	.reg_stride = 4,
>> +};
>> +
>> +static int a1_audio_clkc_probe(struct platform_device *pdev)
>> +{
>> +	const struct a1_audio_data *data;
>> +	struct regmap *map;
>> +	void __iomem *base;
>> +	struct clk *clk;
>> +	unsigned int i;
>> +	int ret;
>> +
>> +	data = of_device_get_match_data(&pdev->dev);
>> +	if (!data)
>> +		return -EINVAL;
>> +
>> +	if (data->core_fwname) {
> 
> That is really over-complicated for what it does  ....
> 
>> +		clk = devm_clk_get_enabled(&pdev->dev, data->core_fwname);
> 
> It does not make a lot of sense that one of the 2 controllers as 2nd
> pclk.
> > You should consider using the AUD2_CLKID_AUDIOTOP as a parent of audio
> gates instead. You would not have to that.
> 
>> +		if (IS_ERR(clk))
>> +			return PTR_ERR(clk);
>> +	}
> 
> 
> 
>> +
>> +	base = devm_platform_ioremap_resource(pdev, 0);
>> +	if (IS_ERR(base))
>> +		return PTR_ERR(base);
>> +
>> +	map = devm_regmap_init_mmio(&pdev->dev, base, &a1_audio_regmap_cfg);
>> +	if (IS_ERR(map))
>> +		return PTR_ERR(map);
>> +
>> +	clk = devm_clk_get_enabled(&pdev->dev, "pclk");
>> +	if (IS_ERR(clk))
>> +		return PTR_ERR(clk);
>> +
>> +	for (i = 0; i < data->hw_clks.num; i++) {
>> +		struct clk_hw *hw = data->hw_clks.hws[i];
>> +
>> +		ret = a1_register_clk(pdev, map, hw);
>> +		if (ret)
>> +			return ret;
>> +	}
>> +
>> +	ret = devm_of_clk_add_hw_provider(&pdev->dev, meson_clk_hw_get,
>> +					  (void *)&data->hw_clks);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (!data->reset_num)
>> +		return 0;
>> +
>> +	return meson_audio_rstc_register(&pdev->dev, map, data->reset_offset,
>> +					 data->reset_num);
>> +}>
> Again this is over-complicated.> Just make an external function for the register, use it for axg, a1,
> a1-vad, then make one file for each controller. That will keep the code
> clean and readable.
> 

It's a bit unclear here. Is this a general recommendation or is it
specific to _this_ location in the code?

> Just make an external function for the register

Dou you suggest to share something like a1_register_clk()? Currently, it
is not good idea, axg-audio uses slightly different way to register
their clocks.

> keep it simple please.
> 
>> +
>> +struct a1_audio_data a1_audio_data = {
>> +	.hw_clks = {
>> +		.hws = a1_audio_hw_clks,
>> +		.num = ARRAY_SIZE(a1_audio_hw_clks),
>> +	},
>> +	.core_fwname = "core",
>> +	.reset_offset = AUDIO_SW_RESET0,
>> +	.reset_num = 32,
>> +};
>> +
>> +struct a1_audio_data a1_audio2_data = {
>> +	.hw_clks = {
>> +		.hws = a1_audio2_hw_clks,
>> +		.num = ARRAY_SIZE(a1_audio2_hw_clks),
>> +	},
>> +};
>> +
>> +static const struct of_device_id a1_audio_clkc_match_table[] = {
>> +	{
>> +		.compatible = "amlogic,a1-audio-clkc",
>> +		.data = &a1_audio_data,
>> +	},
>> +	{
>> +		.compatible = "amlogic,a1-audio2-clkc",
>> +		.data = &a1_audio2_data,
>> +	},
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, a1_audio_clkc_match_table);
>> +
>> +static struct platform_driver a1_audio_clkc_driver = {
>> +	.probe = a1_audio_clkc_probe,
>> +	.driver = {
>> +		.name = "a1-audio-clkc",
>> +		.of_match_table = a1_audio_clkc_match_table,
>> +	},
>> +};
>> +module_platform_driver(a1_audio_clkc_driver);
>> +
>> +MODULE_DESCRIPTION("Amlogic A1 Audio Clock driver");
>> +MODULE_AUTHOR("Jan Dakinevich <jan.dakinevich at salutedevices.com>");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/clk/meson/a1-audio.h b/drivers/clk/meson/a1-audio.h
>> new file mode 100644
>> index 000000000000..9ea9da21ff9b
>> --- /dev/null
>> +++ b/drivers/clk/meson/a1-audio.h
>> @@ -0,0 +1,45 @@
>> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>> +/*
>> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
>> + *
>> + * Author: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> + */
>> +
>> +#ifndef __A1_AUDIO_H
>> +#define __A1_AUDIO_H
>> +
>> +#define AUDIO_CLK_GATE_EN0	0x000
>> +#define AUDIO_MCLK_A_CTRL	0x008
>> +#define AUDIO_MCLK_B_CTRL	0x00c
>> +#define AUDIO_MCLK_C_CTRL	0x010
>> +#define AUDIO_MCLK_D_CTRL	0x014
>> +#define AUDIO_MCLK_E_CTRL	0x018
>> +#define AUDIO_MCLK_F_CTRL	0x01c
>> +#define AUDIO_SW_RESET0		0x028
>> +#define AUDIO_MST_A_SCLK_CTRL0	0x040
>> +#define AUDIO_MST_A_SCLK_CTRL1	0x044
>> +#define AUDIO_MST_B_SCLK_CTRL0	0x048
>> +#define AUDIO_MST_B_SCLK_CTRL1	0x04c
>> +#define AUDIO_MST_C_SCLK_CTRL0	0x050
>> +#define AUDIO_MST_C_SCLK_CTRL1	0x054
>> +#define AUDIO_MST_D_SCLK_CTRL0	0x058
>> +#define AUDIO_MST_D_SCLK_CTRL1	0x05c
>> +#define AUDIO_CLK_TDMIN_A_CTRL	0x080
>> +#define AUDIO_CLK_TDMIN_B_CTRL	0x084
>> +#define AUDIO_CLK_TDMIN_LB_CTRL	0x08c
>> +#define AUDIO_CLK_TDMOUT_A_CTRL	0x090
>> +#define AUDIO_CLK_TDMOUT_B_CTRL	0x094
>> +#define AUDIO_CLK_SPDIFIN_CTRL	0x09c
>> +#define AUDIO_CLK_RESAMPLE_CTRL	0x0a4
>> +#define AUDIO_CLK_LOCKER_CTRL	0x0a8
>> +#define AUDIO_CLK_EQDRC_CTRL	0x0c0
>> +
>> +#define AUDIO2_CLK_GATE_EN0	0x00c
>> +#define AUDIO2_MCLK_VAD_CTRL	0x040
>> +#define AUDIO2_CLK_VAD_CTRL	0x044
>> +#define AUDIO2_CLK_PDMIN_CTRL0	0x058
>> +#define AUDIO2_CLK_PDMIN_CTRL1	0x05c
> 
> Same remark - header is useless.
> 

Do you suggest to move these defines to source file and kill this header?

>> +
>> +#include <dt-bindings/clock/amlogic,a1-audio-clkc.h>
>> +
>> +#endif /* __A1_AUDIO_H */
> 
> 

-- 
Best regards
Jan Dakinevich



More information about the linux-arm-kernel mailing list