[PATCH 4/4] arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2

[Krzysztof Kozlowski]

There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream.  This property looks
like some real hardware, just described wrongly.  Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.

This fixes dtbs_check warning:

  rk3568-lubancat-2.dtb: pcie at fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
index a8a4cc190eb3..a3112d5df200 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
@@ -523,7 +523,6 @@ &pcie3x2 {
 
 &pcie2x1 {
 	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
-	disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_mini_pcie>;
 	status = "okay";
 };
-- 
2.34.1