[PATCH v1 35/49] ARM: dts: imx6q-prti6q: Use #pwm-cells = <3> for imx27-pwm device

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Fri Apr 5 14:42:22 PDT 2024


The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warning:

	arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dtb: pwm at 2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
index 3508a2cd928a..a7d5693c5ab7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts
@@ -22,7 +22,7 @@ backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
 		num-interpolated-steps = <16>;
 		default-brightness-level = <1>;
@@ -292,7 +292,6 @@ &pcie {
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
-- 
2.43.0




More information about the linux-arm-kernel mailing list