[PATCH v1 06/49] ARM: dts: imx6dl-aristainetos_4: Use #pwm-cells = <3> for imx27-pwm device

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Fri Apr 5 14:41:53 PDT 2024


The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warning:

	arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dtb: pwm at 2080000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
index cc861a43eb58..a5ac79346854 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts
@@ -14,7 +14,7 @@ / {
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
@@ -79,6 +79,5 @@ &ipu1_di0_disp0 {
 };
 
 &pwm1 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
-- 
2.43.0




More information about the linux-arm-kernel mailing list