[PATCH v1 0/4] arm64: dts: freescale: verdin-imx8mm/imx8mp: add sleep-moci support

[Stefan Eichenberger]

From: Stefan Eichenberger <stefan.eichenberger at toradex.com>

This patch series adds support for sleep-moci to the Verdin iMX8MM and
iMX8MP in combination with the Dahlia carrier board. sleep-moci is a
GPIO that allows the system on module to turn off regulators that are
not needed in suspend mode on the carrier board.

Stefan Eichenberger (4):
  arm64: dts: freescale: imx8mp-verdin: replace sleep-moci hog with
    regulator
  arm64: dts: freescale: imx8mp-verdin-dahlia: support sleep-moci
  arm64: dts: freescale: imx8mm-verdin: replace sleep-moci hog with
    regulator
  arm64: dts: freescale: imx8mm-verdin-dahlia: support sleep-moci

 .../dts/freescale/imx8mm-verdin-dahlia.dtsi   | 39 +++++++++++++++
 .../boot/dts/freescale/imx8mm-verdin-dev.dtsi |  5 ++
 .../dts/freescale/imx8mm-verdin-yavia.dtsi    |  5 ++
 .../boot/dts/freescale/imx8mm-verdin.dtsi     | 26 ++++++----
 .../dts/freescale/imx8mp-verdin-dahlia.dtsi   | 50 +++++++++++++++++++
 .../boot/dts/freescale/imx8mp-verdin-dev.dtsi |  5 ++
 .../dts/freescale/imx8mp-verdin-yavia.dtsi    |  5 ++
 .../boot/dts/freescale/imx8mp-verdin.dtsi     | 26 ++++++----
 8 files changed, 141 insertions(+), 20 deletions(-)

-- 
2.40.1