[PATCH v2] arm64: dts: ti: k3-am62p: use eFuse MAC Address for CPSW3G Port 1

[Siddharth Vadapalli]

On Thu, Apr 04, 2024 at 12:00:09PM +0200, Krzysztof Kozlowski wrote:
> On 04/04/2024 11:12, Siddharth Vadapalli wrote:
> > On Thu, Apr 04, 2024 at 10:43:04AM +0200, Krzysztof Kozlowski wrote:
> >> On 04/04/2024 10:18, Siddharth Vadapalli wrote:
> >>> Add the "cpsw-mac-efuse" node within "wkup_conf" node corresponding to the
> >>> CTRLMMR_MAC_IDx registers within the CTRL_MMR space. Assign the compatible
> >>> "ti,am62p-cpsw-mac-efuse" to enable "syscon_regmap" operations on these
> >>> registers. The MAC Address programmed in the eFuse is accessible through
> >>> the CTRLMMR_MAC_IDx registers. The "ti,syscon-efuse" device-tree property
> >>> points to the CTRLMMR_MAC_IDx registers, allowing the CPSW driver to fetch
> >>> the MAC Address and assign it to the network interface associated with
> >>> CPSW3G MAC Port 1.
> >>>
> >>> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> >>> ---
> >>>

...

> 
> > 
> >>
> >>>  			};
> >>>  
> >>>  			cpsw_port2: port at 2 {
> >>> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> >>> index a84756c336d0..df9d40f64e3b 100644
> >>> --- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> >>> +++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> >>> @@ -18,6 +18,11 @@ chipid: chipid at 14 {
> >>>  			reg = <0x14 0x4>;
> >>>  			bootph-all;
> >>>  		};
> >>> +
> >>> +		cpsw_mac_efuse: cpsw-mac-efuse at 200 {
> >>
> >> Node names should be generic. See also an explanation and list of
> >> examples (not exhaustive) in DT specification:
> >> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> > 
> > I was following the convention that other mfd-syscon compatible nodes
> > seemed to be using:
> > https://github.com/torvalds/linux/blob/41bccc98fb7931d63d03f326a746ac4d429c1dd3/arch/arm64/boot/dts/ti/k3-am65-main.dtsi#L502
> > The node is:
> > dss_oldi_io_ctrl: dss-oldi-io-ctrl at 41e0
> > corresponding to the compatible:
> > "ti,am654-dss-oldi-io-ctrl"
> > which was added by commit:
> > https://github.com/torvalds/linux/commit/cb523495ee2a5938fbdd30b8a35094d386c55c12
> 
> So if that one was wrong, then what? I don't know really what type of
> device is it, but just because one contributor called it that way, does
> not mean you should keep going. Maybe investigate why that contributor
> did not decide to follow Devicetree spec recommendation?

Yes, it doesn't justify the convention. I seem to have picked a wrong
example when figuring out the convention for naming the node. I plan to
name it as:
ethernet-mac-efuse
while retaining the label "cpsw_mac_efuse" since CPSW is the name of the
Ethernet Switch on the SoC. Please let me know if it is acceptable. I
will post the v3 patch based on your feedback.

Regards,
Siddharth.