[PATCH net-next v6 05/10] net: ti: icssg-prueth: Add SR1.0-specific description bits

[Diogo Ivo]

Add a field to distinguish between SR1.0 and SR2.0 in the driver
as well as the necessary structures to program SR1.0.

Based on the work of Roger Quadros in TI's 5.10 SDK [1].

[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y

Co-developed-by: Jan Kiszka <jan.kiszka at siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo at siemens.com>
Reviewed-by: Roger Quadros <rogerq at kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar at ti.com>
---
Changes in v6:
 - Declare the fields in struct emac_tx_ts_response_sr1 as __le32
   to correctly interpret them from the hardware

Changes in v5: 
 - Added Reviewed-by tag from Danish 

Changes in v4:
 - Change cmd_data type to __le32 to eliminate sparse warnings
 - Add Reviewed-by from Roger (assuming the above change does not
   invalidate it)

 drivers/net/ethernet/ti/icssg/icssg_prueth.h | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index 5d792e9bade0..4632d83d4732 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -129,6 +129,7 @@ struct prueth_rx_chn {
 
 /* data for each emac port */
 struct prueth_emac {
+	bool is_sr1;
 	bool fw_running;
 	struct prueth *prueth;
 	struct net_device *ndev;
@@ -157,6 +158,10 @@ struct prueth_emac {
 	int rx_flow_id_base;
 	int tx_ch_num;
 
+	/* SR1.0 Management channel */
+	struct prueth_rx_chn rx_mgm_chn;
+	int rx_mgm_flow_id_base;
+
 	spinlock_t lock;	/* serialize access */
 
 	/* TX HW Timestamping */
@@ -167,7 +172,7 @@ struct prueth_emac {
 
 	u8 cmd_seq;
 	/* shutdown related */
-	u32 cmd_data[4];
+	__le32 cmd_data[4];
 	struct completion cmd_complete;
 	/* Mutex to serialize access to firmware command interface */
 	struct mutex cmd_lock;
@@ -251,6 +256,13 @@ struct emac_tx_ts_response {
 	u32 hi_ts;
 };
 
+struct emac_tx_ts_response_sr1 {
+	__le32 lo_ts;
+	__le32 hi_ts;
+	__le32 reserved;
+	__le32 cookie;
+};
+
 /* get PRUSS SLICE number from prueth_emac */
 static inline int prueth_emac_slice(struct prueth_emac *emac)
 {
-- 
2.44.0