[PATCH v7 2/5] gpu: host1x: Add Tegra SE to SID table

Akhil R akhilrajeev at nvidia.com
Wed Apr 3 03:00:36 PDT 2024


Add Tegra Security Engine details to the SID table in host1x driver.
These entries are required to be in place to configure the stream ID
for SE. Register writes to stream ID registers fail otherwise.

Signed-off-by: Akhil R <akhilrajeev at nvidia.com>
Acked-by: Mikko Perttunen <mperttunen at nvidia.com>
---
 drivers/gpu/host1x/dev.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c
index 89983d7d73ca..3a0aaa68ac8d 100644
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -215,6 +215,30 @@ static const struct host1x_info host1x07_info = {
  * and firmware stream ID in the MMIO path table.
  */
 static const struct host1x_sid_entry tegra234_sid_table[] = {
+	{
+		/* SE2 MMIO */
+		.base = 0x1658,
+		.offset = 0x90,
+		.limit = 0x90
+	},
+	{
+		/* SE4 MMIO */
+		.base = 0x1660,
+		.offset = 0x90,
+		.limit = 0x90
+	},
+	{
+		/* SE2 channel */
+		.base = 0x1738,
+		.offset = 0x90,
+		.limit = 0x90
+	},
+	{
+		/* SE4 channel */
+		.base = 0x1740,
+		.offset = 0x90,
+		.limit = 0x90
+	},
 	{
 		/* VIC channel */
 		.base = 0x17b8,
-- 
2.43.2




More information about the linux-arm-kernel mailing list