[PATCH] arm64: dts: ti: k3-j722s: Disable ethernet ports by default

Francesco Dolcini francesco at dolcini.it
Tue Apr 2 09:58:24 PDT 2024


Hello Michael,

On Tue, Apr 02, 2024 at 05:18:02PM +0200, Michael Walle wrote:
> Device tree best practice is to disable any external interface in the
> dtsi and just enable them if needed in the device tree. Thus, disable
> both ethernet ports by default and just enable the one used by the EVM
> in its device tree.
> 
> There is no functional change.
> 
> Signed-off-by: Michael Walle <mwalle at kernel.org>
> ---
> This should also be true for all the other SoCs. But I don't wanted to
> touch all the (older) device trees. j722s is pretty new, so there we
> should get it right.
> ---
>  arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 5 +----
>  arch/arm64/boot/dts/ti/k3-j722s.dtsi    | 8 ++++++++
>  2 files changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> index d045dc7dde0c..afe7f68e6a4b 100644
> --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> @@ -224,14 +224,11 @@ cpsw3g_phy0: ethernet-phy at 0 {
>  };
>  
>  &cpsw_port1 {
> +	status = "okay";

status should be the last property, according to the dts coding guidelines.

>  	phy-mode = "rgmii-rxid";
>  	phy-handle = <&cpsw3g_phy0>;
>  };

Francesco




More information about the linux-arm-kernel mailing list