[PATCH] arm64: dts: ti: k3-j722s: Disable ethernet ports by default

[Michael Walle]

Device tree best practice is to disable any external interface in the
dtsi and just enable them if needed in the device tree. Thus, disable
both ethernet ports by default and just enable the one used by the EVM
in its device tree.

There is no functional change.

Signed-off-by: Michael Walle <mwalle at kernel.org>
---
This should also be true for all the other SoCs. But I don't wanted to
touch all the (older) device trees. j722s is pretty new, so there we
should get it right.
---
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 5 +----
 arch/arm64/boot/dts/ti/k3-j722s.dtsi    | 8 ++++++++
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index d045dc7dde0c..afe7f68e6a4b 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -224,14 +224,11 @@ cpsw3g_phy0: ethernet-phy at 0 {
 };
 
 &cpsw_port1 {
+	status = "okay";
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
 };
 
-&cpsw_port2 {
-	status = "disabled";
-};
-
 &main_gpio1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
index c75744edb143..d0451e6e7496 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
@@ -83,6 +83,14 @@ &inta_main_dmss {
 	ti,interrupt-ranges = <7 71 21>;
 };
 
+&cpsw_port1 {
+	status = "disabled";
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
 &oc_sram {
 	reg = <0x00 0x70000000 0x00 0x40000>;
 	ranges = <0x00 0x00 0x70000000 0x40000>;
-- 
2.39.2