[PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator

Bartosz Golaszewski brgl at bgdev.pl
Tue Apr 2 01:44:30 PDT 2024


On Sat, Mar 30, 2024 at 8:16 PM Bartosz Golaszewski <brgl at bgdev.pl> wrote:
>
> On Fri, 29 Mar 2024 20:57:52 +0100, Maximilian Luz <luzmaximilian at gmail.com> said:
> > On 3/29/24 8:46 PM, Bartosz Golaszewski wrote:
> >> On Fri, 29 Mar 2024 at 20:39, Maximilian Luz <luzmaximilian at gmail.com> wrote:
> >>>
> >>> On 3/29/24 8:26 PM, Bartosz Golaszewski wrote:
> >>>> On Fri, 29 Mar 2024 at 20:22, Maximilian Luz <luzmaximilian at gmail.com> wrote:
> >>>>>
> >>>>> On 3/29/24 8:07 PM, Bartosz Golaszewski wrote:
> >>>>>>
> >>>>>> Both with and without SHM bridge?
> >>>>>
> >>>>> With CONFIG_QCOM_TZMEM_MODE_GENERIC=y (and the upcoming fix) everything
> >>>>> works. With CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE=y things unfortunately
> >>>>> still get stuck at boot (regardless of the fix). I think that's
> >>>>> happening even before anything efivar related should come up.
> >>>>>
> >>>>
> >>>> This is on X13s? I will get one in 3 weeks. Can you get the bootlog
> >>>> somehow? Does the laptop have any serial console?
> >>>
> >>> Surface Pro X (sc8180x), but it should be similar enough to the X13s in
> >>> that regard. At least from what people with access to the X13s told me,
> >>> the qseecom stuff seems to behave the same.
> >>>
> >>> Unfortunately I don't have a direct serial console. Best I have is
> >>> USB-serial, but it's not even getting there. I'll have to try and see if
> >>> I can get some more info on the screen.
> >>>
> >>
> >> I have access to a sc8180x-primus board, does it make sense to test
> >> with this one? If so, could you give me instructions on how to do it?
> >
> > I guess it's worth a shot.
> >
> >  From what I can tell, there shouldn't be any patches in my tree that
> > would conflict with it. So I guess it should just be building it with
> > CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE=y and booting.
> >
> > I am currently testing it on top of a patched v6.8 tree though (but that
> > should just contain patches to get the Pro X running). You can find the
> > full tree at
> >
> >      https://github.com/linux-surface/kernel/tree/spx/v6.8
> >
> > The last commit is the fix I mentioned, so you might want to revert
> > that, since the shmem issue triggers regardless of that and it prevents
> > your series from applying cleanly.
> >
> > Best regards,
> > Max
> >
>
> sc8180x-primus' support upstream is quite flaky. The board boots 50% of time.
> However it's true that with SHM bridge it gets to:
>
> mount: mounting efivarfs on /sys/firmware/efi/efivars failed: Operation not supported
>
> and stops 100% of the time. Without SHM bridge I cannot boot it either because
> I suppose I need the patch you sent yesterday. I haven't had the time to
> rebase it yet, it's quite intrusive to my series.
>
> I can confirm that with that patch the board still boots but still 50% of the
> time.
>
> Bart

Hi!

I was under the impression that until v8, the series worked on sc8180x
but I'm seeing that even v7 has the same issue with SHM Bridge on
sc8180x-primus. Could you confirm? Because I'm not sure if I should
track the differences or the whole thing was broken for this platform
from the beginning.

Bart



More information about the linux-arm-kernel mailing list