[PATCH 0/2] Enable internal strobe pulldown on Radxa ROCK 4 SBCs

[Heiko Stuebner]

On Wed, 27 Mar 2024 20:26:36 +0100, Folker Schwesinger wrote:
> Various RK3399 boards, including the ROCK Pi 4 series showed instabilities
> with some eMMC modules when operating in HS400 mode [1]. Later, a missing
> pull-down resistor on the eMMC strobe line was identified as the root
> cause of these instabilities [2].
> 
> This series enables the internal pull-down on the eMMC PHY strobe line
> for all ROCK 4 series boards as they all lack an external strobe
> pull-down resistor.
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK Pi 4
      commit: f720dd9b8b6d8b2160beda789429d5489ce8a099
[2/2] arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK 4C+
      commit: c1b1f340dd7db11f273e426e110697551c9f501f

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>