[PATCH] arm64: dts: imx8mm-venice-gw790: Remove phy-mode from switch node

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Per microchip,ksz.yaml, phy-mode is not a valid property in the
top-level switch node.

phy-mode = "rgmii-id" is already passed in the CPU port switch (port at 5).

Remove it from the top-level switch node to fix the following
schema warning:

switch at 5f: Unevaluated properties are not allowed ('phy-mode' was unexpected)
from schema $id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index f45c22d8fb50..6c1e863f4d5a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -642,7 +642,6 @@ switch: switch at 5f {
 		pinctrl-0 = <&pinctrl_ksz>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-		phy-mode = "rgmii-id";
 
 		ports {
 			#address-cells = <1>;
-- 
2.34.1