[PATCH v2 18/28] pinctrl: renesas: rzg2l: add support for different ds values on different groups

[Paul Barker]

On 29/09/2023 06:39, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> 
> RZ/G3S supports different drive strength values for different power sources
> and pin groups (A, B, C). On each group there could be up to 4 drive
> strength values per power source. Available power sources are 1v8, 2v5,
> 3v3. Drive strength values are fine tuned than what was previously

Should this be "are more fine tuned" or "are less fine tuned"?

> available on the driver thus the necessity of having micro-amp support.
> As drive strength and power source values are linked together the
> hardware setup for these was moved at the end of
> rzg2l_pinctrl_pinconf_set() to ensure proper validation of the new
> values.
> 
> The drive strength values are expected to be initialized though SoC
> specific hardware configuration data structure.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>

Thanks,
Paul
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_0x27F4B3459F002257.asc
Type: application/pgp-keys
Size: 3520 bytes
Desc: OpenPGP public key
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230929/40f4b82e/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 236 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230929/40f4b82e/attachment.sig>