[PATCH v3 01/12] dt-bindings: net: add STM32MP13 compatible in documentation for stm32

[Conor Dooley]

Hey,

On Thu, Sep 28, 2023 at 05:15:01PM +0200, Christophe Roullier wrote:
> New STM32 SOC have 2 GMACs instances.
> GMAC IP version is SNPS 4.20.
> 
> Signed-off-by: Christophe Roullier <christophe.roullier at foss.st.com>
> ---
>  .../devicetree/bindings/net/stm32-dwmac.yaml  | 78 +++++++++++++++++--
>  1 file changed, 70 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index fc8c96b08d7dc..ca976281bfc22 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -22,18 +22,17 @@ select:
>          enum:
>            - st,stm32-dwmac
>            - st,stm32mp1-dwmac
> +          - st,stm32mp13-dwmac
>    required:
>      - compatible
>  
> -allOf:
> -  - $ref: snps,dwmac.yaml#
> -
>  properties:
>    compatible:
>      oneOf:
>        - items:
>            - enum:
>                - st,stm32mp1-dwmac
> +              - st,stm32mp13-dwmac
>            - const: snps,dwmac-4.20a
>        - items:
>            - enum:
> @@ -74,13 +73,10 @@ properties:
>  
>    st,syscon:
>      $ref: /schemas/types.yaml#/definitions/phandle-array
> -    items:
> -      - items:
> -          - description: phandle to the syscon node which encompases the glue register
> -          - description: offset of the control register
>      description:
>        Should be phandle/offset pair. The phandle to the syscon node which
> -      encompases the glue register, and the offset of the control register
> +      encompases the glue register, the offset of the control register and
> +      the mask to set bitfield in control register
>  
>    st,eth-clk-sel:
>      description:
> @@ -101,6 +97,38 @@ required:
>  
>  unevaluatedProperties: false
>  
> +allOf:
> +  - $ref: snps,dwmac.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - st,stm32mp1-dwmac
> +              - st,stm32-dwmac
> +    then:
> +      properties:
> +        st,syscon:
> +          items:
> +            items:
> +              - description: phandle to the syscon node which encompases the glue register
> +              - description: offset of the control register

These descriptions should, IMO, be moved back out to the st,syscon
definition. If you put the 3 descriptions there, with "minItems: 2" &
put "maxItems: 2" and "minItems: 3" in each of the if/then clauses.
Also, it should be sufficient to simplify to if/then/else.

Cheers,
Conor.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - st,stm32mp13-dwmac
> +    then:
> +      properties:
> +        st,syscon:
> +          items:
> +            items:
> +              - description: phandle to the syscon node which encompases the glue register
> +              - description: offset of the control register
> +              - description: field to set mask in register
> +
>  examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -161,3 +189,37 @@ examples:
>             snps,pbl = <8>;
>             phy-mode = "mii";
>         };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    #include <dt-bindings/mfd/stm32h7-rcc.h>
> +    //Example 4
> +     ethernet3: ethernet at 5800a000 {
> +           compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
> +           reg = <0x5800a000 0x2000>;
> +           reg-names = "stmmaceth";
> +           interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
> +                                 <&exti 68 IRQ_TYPE_LEVEL_HIGH>;
> +           interrupt-names = "macirq",
> +                             "eth_wake_irq";
> +           clock-names = "stmmaceth",
> +                         "mac-clk-tx",
> +                         "mac-clk-rx",
> +                         "eth-ck",
> +                         "ptp_ref",
> +                         "ethstp";
> +           clocks = <&rcc ETHMAC>,
> +                    <&rcc ETHTX>,
> +                    <&rcc ETHRX>,
> +                    <&rcc ETHCK_K>,
> +                    <&rcc ETHPTP_K>,
> +                    <&rcc ETHSTP>;
> +           st,syscon = <&syscfg 0x4 0xff0000>;
> +           snps,mixed-burst;
> +           snps,pbl = <2>;
> +           snps,axi-config = <&stmmac_axi_config_1>;
> +           snps,tso;
> +           phy-mode = "rmii";
> +     };
> -- 
> 2.25.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230928/e3005648/attachment.sig>