[PATCH 1/2] arm64: dts: imx93: Add audio device nodes

[Krzysztof Kozlowski]

On 27/09/2023 04:33, Chancel Liu wrote:
> Add audio devices nodes including SAI, MICFIL, XCVR and MQS.
> 
> Signed-off-by: Chancel Liu <chancel.liu at nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 87 ++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index f20dd18e0b65..6ed7b156c633 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -366,6 +366,25 @@ flexcan1: can at 443a0000 {
>  				status = "disabled";
>  			};
>  
> +			sai1: sai at 443b0000 {
> +				compatible = "fsl,imx93-sai";
> +				reg = <0x443b0000 0x10000>;
> +				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
> +					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
> +					 <&clk IMX93_CLK_DUMMY>;
> +				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> +				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
> +				dma-names = "rx", "tx";
> +				status = "disabled";
> +			};
> +
> +			mqs1: mqs {

Why do you have non-MMIO nodes in soc@? You introduce new warnings.
Please test your code (dtbs_check W=1)


Best regards,
Krzysztof