[PATCH v5 0/7] soc: qcom: Add uart console support for SM4450

[Tengfei Fan]

This series add base description of UART, TLMM, RPMHCC, GCC and RPMh PD
nodes which helps SM4450 boot to shell with console on boards with this
SoC.

Signed-off-by: Tengfei Fan <quic_tengfan at quicinc.com>
---
This patch series depends on below patch series:
"[PATCH v2 0/4] clk: qcom: Add support for GCC and RPMHCC on SM4450"
https://lore.kernel.org/linux-arm-msm/20230909123431.1725728-1-quic_ajipan@quicinc.com/
"[PATCH v4 0/2] pinctl: qcom: Add SM4450 pinctrl driver"
https://lore.kernel.org/linux-arm-msm/20230920082102.5744-1-quic_tengfan@quicinc.com/

v4 -> v5:
  - separate reserved gpios setting from enable UART console patch

v3 -> v4:
  - adjustment the sequence of property and property-names
  - update 0 to 0x0 for reg params
  - remove unrelated change
  - separate SoC change and board change

v2 -> v3:
  - fix dtbs_check warning
  - remove interconnect, iommu, scm and tcsr related code
  - rearrangement dt node
  - remove smmu, scm and tcsr related documentation update
  - enable CONFIG_SM_GCC_4450 in defconfig related patch

v1 -> v2:
  - setting "qcom,rpmh-rsc" compatible to the first property
  - keep order by unit address
  - move tlmm node into soc node
  - update arm,smmu.yaml
  - add enable pinctrl and interconnect defconfig patches
  - remove blank line
  - redo dtbs_check check

previous discussion here:
[1] v4: https://lore.kernel.org/linux-arm-msm/20230922081026.2799-1-quic_tengfan@quicinc.com
[2] v3: https://lore.kernel.org/linux-arm-msm/20230920082102.5744-1-quic_tengfan@quicinc.com
[3] v2: https://lore.kernel.org/linux-arm-msm/20230915021509.25773-1-quic_tengfan@quicinc.com
[4] v1: https://lore.kernel.org/linux-arm-msm/20230908065847.28382-1-quic_tengfan@quicinc.com

Ajit Pandey (1):
  arm64: dts: qcom: sm4450: Add apps_rsc and cmd_db node

Tengfei Fan (6):
  dt-bindings: interrupt-controller: qcom,pdc: document qcom,sm4450-pdc
  arm64: dts: qcom: sm4450: Add RPMH and Global clock
  arm64: dts: qcom: add uart console support for SM4450
  arm64: dts: qcom: sm4450-qrd: add QRD4450 uart support
  arm64: dts: qcom: sm4450-qrd: mark QRD4450 reserved gpios
  arm64: defconfig: enable clock controller and pinctrl

 .../interrupt-controller/qcom,pdc.yaml        |   1 +
 arch/arm64/boot/dts/qcom/sm4450-qrd.dts       |  19 +++-
 arch/arm64/boot/dts/qcom/sm4450.dtsi          | 107 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   2 +
 4 files changed, 127 insertions(+), 2 deletions(-)


base-commit: 940fcc189c51032dd0282cbee4497542c982ac59
-- 
2.17.1