[PATCH 1/3] arm64: dts: imx93: add edma1 and edma2
Shawn Guo
shawnguo at kernel.org
Sun Sep 24 17:33:14 PDT 2023
On Wed, Aug 23, 2023 at 02:00:53PM -0400, Frank Li wrote:
> Add edma<n> nodes.
>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx93.dtsi | 116 +++++++++++++++++++++++
> 1 file changed, 116 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 6f85a05ee7e1..acdca18673b7 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -185,6 +185,46 @@ aips1: bus at 44000000 {
> #size-cells = <1>;
> ranges;
>
> + edma1: dma-controller at 44000000{
> + compatible = "fsl,imx93-edma3";
> + reg = <0x44000000 0x200000>;
> + #dma-cells = <3>;
> + dma-channels = <31>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, // 0: Reserved
> + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, // 1: CANFD1
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, // 2: Reserved
> + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, // 3: GPIO1 CH0
> + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, // 4: GPIO1 CH1
> + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, // 5: I3C1 TO Bus
> + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, // 6: I3C1 From Bus
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, // 7: LPI2C1 M TX
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, // 8: LPI2C1 S TX
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, // 9: LPI2C2 M RX
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
> + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
> + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
> + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
> + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
> + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
> + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
> + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1
> + clocks = <&clk IMX93_CLK_EDMA1_GATE>;
> + clock-names = "dma";
> + };
> +
> anomix_ns_gpr: syscon at 44210000 {
> compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
> reg = <0x44210000 0x1000>;
> @@ -423,6 +463,82 @@ aips2: bus at 42000000 {
> #size-cells = <1>;
> ranges;
>
> + edma2: dma-controller at 42000000{
> + compatible = "fsl,imx93-edma4";
> + reg = <0x42000000 0x210000>;
> + #dma-cells = <3>;
> + shared-interrupt;
> + dma-channels = <64>;
> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX93_CLK_EDMA2_GATE>;
> + clock-names = "dma";
> + fsl,edma-axi;
I do not find this property in bindings doc.
> + status = "okay";
Unnecessary 'status'.
Shawn
> + };
> +
> wakeupmix_gpr: syscon at 42420000 {
> compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
> reg = <0x42420000 0x1000>;
> --
> 2.34.1
>
More information about the linux-arm-kernel
mailing list