[PATCH v2 1/2] arm64: dts: ti: am642-evm: Add overlay for NAND expansion card
Roger Quadros
rogerq at kernel.org
Sat Sep 23 01:00:45 PDT 2023
The NAND expansion card plugs in over the HSE (High Speed Expansion)
connector. Add support for it.
Signed-off-by: Roger Quadros <rogerq at kernel.org>
---
arch/arm64/boot/dts/ti/Makefile | 3 +-
arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 140 ++++++++++++++++++
2 files changed, 142 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index e7b8e2e7f083..ad5f688df430 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -28,7 +28,8 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
# Boards with AM64x SoC
-dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
+k3-am642-evm-nand-dtbs := k3-am642-evm.dtb k3-am642-evm-nand.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-nand.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
new file mode 100644
index 000000000000..12593836eaab
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for HSE NAND expansion card on AM642 EVM
+ *
+ * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "k3-pinctrl.h"
+
+&main_pmx0 {
+ gpmc0_pins_default: gpmc0-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */
+
+ AM64X_IOPAD(0x003c, PIN_INPUT, 0) /* (T20) GPMC0_AD0 */
+ AM64X_IOPAD(0x0040, PIN_INPUT, 0) /* (U21) GPMC0_AD1 */
+ AM64X_IOPAD(0x0064, PIN_INPUT, 0) /* (R16) GPMC0_AD10 */
+ AM64X_IOPAD(0x0068, PIN_INPUT, 0) /* (W20) GPMC0_AD11 */
+ AM64X_IOPAD(0x006c, PIN_INPUT, 0) /* (W21) GPMC0_AD12 */
+ AM64X_IOPAD(0x0070, PIN_INPUT, 0) /* (V18) GPMC0_AD13 */
+ AM64X_IOPAD(0x0074, PIN_INPUT, 0) /* (Y21) GPMC0_AD14 */
+ AM64X_IOPAD(0x0078, PIN_INPUT, 0) /* (Y20) GPMC0_AD15 */
+ AM64X_IOPAD(0x0044, PIN_INPUT, 0) /* (T18) GPMC0_AD2 */
+ AM64X_IOPAD(0x0048, PIN_INPUT, 0) /* (U20) GPMC0_AD3 */
+ AM64X_IOPAD(0x004c, PIN_INPUT, 0) /* (U18) GPMC0_AD4 */
+ AM64X_IOPAD(0x0050, PIN_INPUT, 0) /* (U19) GPMC0_AD5 */
+ AM64X_IOPAD(0x0054, PIN_INPUT, 0) /* (V20) GPMC0_AD6 */
+ AM64X_IOPAD(0x0058, PIN_INPUT, 0) /* (V21) GPMC0_AD7 */
+ AM64X_IOPAD(0x005c, PIN_INPUT, 0) /* (V19) GPMC0_AD8 */
+ AM64X_IOPAD(0x0060, PIN_INPUT, 0) /* (T17) GPMC0_AD9 */
+ AM64X_IOPAD(0x0098, PIN_INPUT_PULLUP, 0) /* (W19) GPMC0_WAIT0 */
+ AM64X_IOPAD(0x009c, PIN_INPUT_PULLUP, 0) /* (Y18) GPMC0_WAIT1 */
+ AM64X_IOPAD(0x00a8, PIN_OUTPUT_PULLUP, 0) /* (R19) GPMC0_CSn0 */
+ AM64X_IOPAD(0x00ac, PIN_OUTPUT_PULLUP, 0) /* (R20) GPMC0_CSn1 */
+ AM64X_IOPAD(0x00b0, PIN_OUTPUT_PULLUP, 0) /* (P19) GPMC0_CSn2 */
+ AM64X_IOPAD(0x00b4, PIN_OUTPUT_PULLUP, 0) /* (R21) GPMC0_CSn3 */
+ AM64X_IOPAD(0x007c, PIN_OUTPUT, 0) /* (R17) GPMC0_CLK */
+ AM64X_IOPAD(0x0084, PIN_OUTPUT, 0) /* (P16) GPMC0_ADVn_ALE */
+ AM64X_IOPAD(0x0088, PIN_OUTPUT, 0) /* (R18) GPMC0_OEn_REn */
+ AM64X_IOPAD(0x008c, PIN_OUTPUT, 0) /* (T21) GPMC0_WEn */
+ AM64X_IOPAD(0x0090, PIN_OUTPUT, 0) /* (P17) GPMC0_BE0n_CLE */
+ AM64X_IOPAD(0x00a0, PIN_OUTPUT_PULLUP, 0) /* (N16) GPMC0_WPn */
+ AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */
+ >;
+ };
+};
+
+&main_gpio0 {
+ gpio0-36 {
+ gpio-hog;
+ gpios = <36 0>;
+ input;
+ line-name = "GPMC0_MUX_DIR";
+ };
+};
+
+&elm0 {
+ status = "okay";
+};
+
+&gpmc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc0_pins_default>;
+ ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ nand at 0,0 {
+ compatible = "ti,am64-nand";
+ reg = <0 0 64>; /* device IO registers */
+ interrupt-parent = <&gpmc0>;
+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+ <1 IRQ_TYPE_NONE>; /* termcount */
+ rb-gpios = <&gpmc0 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-polled";
+ ti,nand-ecc-opt = "bch8"; /* BCH8: Bootrom limitation */
+ ti,elm-id = <&elm0>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <40>;
+ gpmc,cs-wr-off-ns = <40>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <25>;
+ gpmc,adv-wr-off-ns = <25>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <20>;
+ gpmc,oe-on-ns = <3>;
+ gpmc,oe-off-ns = <30>;
+ gpmc,access-ns = <30>;
+ gpmc,rd-cycle-ns = <40>;
+ gpmc,wr-cycle-ns = <40>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "NAND.tiboot3";
+ reg = <0x00000000 0x00200000>; /* 2M */
+ };
+ partition at 200000 {
+ label = "NAND.tispl";
+ reg = <0x00200000 0x00200000>; /* 2M */
+ };
+ partition at 400000 {
+ label = "NAND.tiboot3.backup"; /* 2M */
+ reg = <0x00400000 0x00200000>; /* BootROM looks at 4M */
+ };
+ partition at 600000 {
+ label = "NAND.u-boot";
+ reg = <0x00600000 0x00400000>; /* 4M */
+ };
+ partition at a00000 {
+ label = "NAND.u-boot-env";
+ reg = <0x00a00000 0x00040000>; /* 256K */
+ };
+ partition at a40000 {
+ label = "NAND.u-boot-env.backup";
+ reg = <0x00a40000 0x00040000>; /* 256K */
+ };
+ partition at a80000 {
+ label = "NAND.file-system";
+ reg = <0x00a80000 0x3f580000>;
+ };
+ };
+ };
+};
--
2.34.1
More information about the linux-arm-kernel
mailing list