[PATCH 1/2] arm64: dts: imx8mp: Update i.MX8MP DHCOM SoM DT to production rev.200
Marek Vasut
marex at denx.de
Thu Sep 21 12:29:32 PDT 2023
The current imx8mp-dhcom-som.dtsi describes prototype rev.100 SoM,
update the DT to describe production rev.200 SoM which brings the
following changes:
- Fast SoC GPIOs exposed on the SoM edge connector
- Slow GPIOs like component resets moved to I2C GPIO expander
- ADC upgraded from TLA2024 to ADS1015 with conversion interrupt
- EEPROM size increased from 256 B to 4 kiB
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Conor Dooley <conor+dt at kernel.org>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Frieder Schrempf <frieder.schrempf at kontron.de>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
---
.../boot/dts/freescale/imx8mp-dhcom-som.dtsi | 145 +++++++++++-------
1 file changed, 90 insertions(+), 55 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 4582a0bbe3726..d8963f32ec84c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -25,9 +25,7 @@ memory at 40000000 {
reg_eth_vio: regulator-eth-vio {
compatible = "regulator-fixed";
- gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pinctrl_enet_vio>;
- pinctrl-names = "default";
+ gpio = <&ioexp 2 GPIO_ACTIVE_LOW>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
@@ -60,7 +58,7 @@ reg_vdd_3p3v_awo: regulator-vdd-3p3v-awo { /* VDD_3V3_AWO */
wlan_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&ioexp 1 GPIO_ACTIVE_LOW>;
};
};
@@ -117,7 +115,7 @@ ethphy0f: ethernet-phy at 0 { /* SMSC LAN8740Ai */
reg = <0>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
- reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
/* Non-default PHY population option. */
status = "disabled";
};
@@ -133,7 +131,7 @@ ethphy0g: ethernet-phy at 5 { /* Micrel KSZ9131RNXI */
reg = <5>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
- reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
/* Default PHY population option. */
status = "okay";
};
@@ -355,8 +353,9 @@ ldo5: LDO5 { /* NVCC_SD2 */
};
adc at 48 {
- compatible = "ti,tla2024";
+ compatible = "ti,ads1015";
reg = <0x48>;
+ interrupts-extended = <&ioexp 7 IRQ_TYPE_EDGE_FALLING>;
#address-cells = <1>;
#size-cells = <0>;
@@ -403,25 +402,42 @@ touchscreen at 49 {
};
eeprom0: eeprom at 50 { /* EEPROM with EQoS MAC address */
- compatible = "atmel,24c02";
- pagesize = <16>;
+ compatible = "atmel,24c32"; /* M24C32-D */
+ pagesize = <32>;
reg = <0x50>;
};
rv3032: rtc at 51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
- interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rtc>;
+ interrupts-extended = <&ioexp 3 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
};
eeprom1: eeprom at 53 { /* EEPROM with FEC MAC address */
- compatible = "atmel,24c02";
- pagesize = <16>;
+ compatible = "atmel,24c32"; /* M24C32-D */
+ pagesize = <32>;
reg = <0x53>;
};
+
+ ioexp: gpio at 74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ioexp>;
+ wakeup-source;
+
+ gpio-line-names =
+ "BT_REG_EN", "WL_REG_EN", "VIO_SWITCHED_#EN", "RTC_#INT",
+ "ENET_QOS_#RST", "RGB_OSZ_ENABLE", "USB1_ID", "ADC_ALTER_RDY",
+ "DHCOM-W", "DHCOM-V", "DHCOM-U", "DHCOM-T",
+ "BT_HOST_WAKE", "BT_DEV_WAKE", "", "";
+ };
};
&i2c4 {
@@ -493,10 +509,8 @@ &uart2 {
assigned-clock-rates = <80000000>;
bluetooth {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_bt>;
compatible = "cypress,cyw4373a0-bt";
- shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>;
max-speed = <4000000>;
};
};
@@ -523,8 +537,6 @@ &usb3_0 {
};
&usb_dwc3_0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0_vbus>;
dr_mode = "otg";
status = "okay";
};
@@ -610,8 +622,9 @@ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
- /* GPIO_M is connected to CLKOUT1 */
- &pinctrl_dhcom_int>;
+ &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+ &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+ &pinctrl_dhcom_s &pinctrl_dhcom_int>;
pinctrl-names = "default";
pinctrl_dhcom_a: dhcom-a-grp {
@@ -698,6 +711,55 @@ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2
>;
};
+ pinctrl_dhcom_m: dhcom-m-grp {
+ fsl,pins = <
+ /* CSIx_MCLK */
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x2
+ >;
+ };
+
+ pinctrl_dhcom_n: dhcom-n-grp {
+ fsl,pins = <
+ /* CSI2_D3- */
+ MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x2
+ >;
+ };
+
+ pinctrl_dhcom_o: dhcom-o-grp {
+ fsl,pins = <
+ /* CSI2_D3+ */
+ MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x2
+ >;
+ };
+
+ pinctrl_dhcom_p: dhcom-p-grp {
+ fsl,pins = <
+ /* CSI2_D2- */
+ MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x2
+ >;
+ };
+
+ pinctrl_dhcom_q: dhcom-q-grp {
+ fsl,pins = <
+ /* CSI2_D2+ */
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x2
+ >;
+ };
+
+ pinctrl_dhcom_r: dhcom-r-grp {
+ fsl,pins = <
+ /* CSI2_D1- */
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x2
+ >;
+ };
+
+ pinctrl_dhcom_s: dhcom-s-grp {
+ fsl,pins = <
+ /* CSI2_D1+ */
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x2
+ >;
+ };
+
pinctrl_dhcom_int: dhcom-int-grp {
fsl,pins = <
/* INT_HIGHEST_PRIO */
@@ -771,16 +833,8 @@ MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x4000001f
>;
};
- pinctrl_enet_vio: dhcom-enet-vio-grp {
- fsl,pins = <
- MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22
- >;
- };
-
pinctrl_ethphy0: dhcom-ethphy0-grp {
fsl,pins = <
- /* ENET_QOS_#RST Reset */
- MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22
/* ENET_QOS_#INT Interrupt */
MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22
>;
@@ -906,6 +960,13 @@ MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84
>;
};
+ pinctrl_ioexp: dhcom-ioexp-grp {
+ fsl,pins = <
+ /* #GPIO_EXP_INT */
+ MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22
+ >;
+ };
+
pinctrl_pmic: dhcom-pmic-grp {
fsl,pins = <
/* PMIC_nINT */
@@ -919,13 +980,6 @@ MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6
>;
};
- pinctrl_rtc: dhcom-rtc-grp {
- fsl,pins = <
- /* RTC_#INT Interrupt */
- MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x40000080
- >;
- };
-
pinctrl_tc9595: dhcom-tc9595-grp {
fsl,pins = <
/* RESET_DSIBRIDGE */
@@ -971,13 +1025,6 @@ MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49
>;
};
- pinctrl_uart2_bt: dhcom-uart2-bt-grp {
- fsl,pins = <
- /* BT_REG_EN */
- MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
- >;
- };
-
pinctrl_uart3: dhcom-uart3-grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49
@@ -994,12 +1041,6 @@ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49
>;
};
- pinctrl_usb0_vbus: dhcom-usb0-grp {
- fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0
- >;
- };
-
pinctrl_usb1_vbus: dhcom-usb1-grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6
@@ -1015,8 +1056,6 @@ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
- /* WL_REG_EN */
- MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
>;
};
@@ -1028,8 +1067,6 @@ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
- /* WL_REG_EN */
- MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
>;
};
@@ -1041,8 +1078,6 @@ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
- /* WL_REG_EN */
- MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
>;
};
--
2.40.1
More information about the linux-arm-kernel
mailing list