[PATCH 1/2] arm64: dts: ti: Enable support for overlays for relevant boards

[Nishanth Menon]

On 16:34-20230920, Roger Quadros wrote:
> Enable __symbols__ in board DT files for which we expect
> overlays to be supported.
> 
> Signed-off-by: Roger Quadros <rogerq at kernel.org>
> ---
>  arch/arm64/boot/dts/ti/Makefile | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index e7b8e2e7f083..06d6f264f292 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -72,8 +72,16 @@ dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
>  
>  # Enable support for device-tree overlays
> +DTC_FLAGS_k3-am625-beagleplay += -@
>  DTC_FLAGS_k3-am625-sk += -@
>  DTC_FLAGS_k3-am62-lp-sk += -@
> +DTC_FLAGS_k3-am62a7-sk += -@
> +DTC_FLAGS_k3-am642-evm += -@
> +DTC_FLAGS_k3-am654-base-board += -@
>  DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
> +DTC_FLAGS_k3-am68-sk-base-board += -@
> +DTC_FLAGS_k3-am69-sk += -@
>  DTC_FLAGS_k3-j721e-common-proc-board += -@
> +DTC_FLAGS_k3-j721e-sk += -@
>  DTC_FLAGS_k3-j721s2-common-proc-board += -@
> +DTC_FLAGS_k3-j784s4-evm += -@

is'nt it better to do it in context of the changes introduced?

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D