[PATCH v2] arm64: dts: ti: k3-am654-base-board: Add I2C I/O expander
Andrew Davis
afd at ti.com
Wed Sep 20 06:24:36 PDT 2023
On 9/20/23 12:38 AM, Ravi Gunasekaran wrote:
> AM654 baseboard has two TCA9554 I/O expander on the WKUP_I2C0 bus.
> The expander at address 0x38 is used to detect daughter cards.
> Add a node for this I/O expander.
>
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
> ---
> Changes from v1:
> ---------------
> * Moved the expander node @38 to appear before the one at address 39.
> * Removed the label pca9554_1 for the node as it is not used.
>
LGTM,
Reviewed-by: Andrew Davis <afd at ti.com>
> v1: https://lore.kernel.org/all/20230919050340.16156-1-r-gunasekaran@ti.com/
>
> arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index f5c26e9fba98..1637ec5ab5ed 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -369,6 +369,13 @@
> ti,enable-vout-discharge;
> };
>
> + gpio at 38 {
> + compatible = "nxp,pca9554";
> + reg = <0x38>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> pca9554: gpio at 39 {
> compatible = "nxp,pca9554";
> reg = <0x39>;
>
> base-commit: dfa449a58323de195773cf928d99db4130702bf7
More information about the linux-arm-kernel
mailing list