[PATCH v3 4/5] arm64: dts: qcom: add uart console support for SM4450

[Konrad Dybcio]

On 9/20/23 08:54, Tengfei Fan wrote:
> Add base description of UART and TLMM nodes which helps SM4450
> boot to shell with console on boards with this SoC.
> 
> Signed-off-by: Tengfei Fan <quic_tengfan at quicinc.com>
> ---
The SoC change must be separate from the board change.

[...]

Please leave a comment explaining what these GPIOs are
used for.
> +&tlmm {
> +	gpio-reserved-ranges = <0 4>, <136 1>;
> +};

[...]

> +		qupv3_id_0: geniqup at ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x00ac0000 0x0 0x2000>;
> +			ranges;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
property
property-names

[...]

> +
> +			uart7: serial at a88000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0 0x00a88000 0 0x4000>;
Use 0x0 consistently.

> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
property
property-names

> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
ditto

[...]

> +			compatible = "qcom,sm4450-tlmm";
> +			reg = <0 0x0f100000 0 0x300000>;
Use 0x0 consistently

> +			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			gpio-ranges = <&tlmm 0 0 137>;
> +			wakeup-parent = <&pdc>;
> +
> +			qup_uart7_rx: qup-uart7-rx-state {
> +				pins = "gpio23";
> +				function = "qup1_se2_l2";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart7_tx: qup-uart7-tx-state {
> +				pins = "gpio22";
> +				function = "qup1_se2_l2";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +		};
> +
>   		intc: interrupt-controller at 17200000 {
>   			compatible = "arm,gic-v3";
>   			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
> @@ -476,7 +525,6 @@
>   				clocks = <&xo_board>;
>   			};
>   		};
> -
Totally unrelated change, fix the patch introducing it instead.

Konrad