[PATCH v2] regulator: mt6358: split ops for buck and linear range LDO regulators

Chen-Yu Tsai wenst at chromium.org
Wed Sep 20 01:53:34 PDT 2023


The buck and linear range LDO (VSRAM_*) regulators share one set of ops.
This set includes support for get/set mode. However this only makes
sense for buck regulators, not LDOs. The callbacks were not checking
whether the register offset and/or mask for mode setting was valid or
not. This ends up making the kernel report "normal" mode operation for
the LDOs.

Create a new set of ops without the get/set mode callbacks for the
linear range LDO regulators.

Fixes: f67ff1bd58f0 ("regulator: mt6358: Add support for MT6358 regulator")
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
Changes since v1:
- Create a new set of ops for the LDOs, as suggested by Mark
- Patch subject updated to match

 drivers/regulator/mt6358-regulator.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
index b9cda2210c33..65fbd95f1dbb 100644
--- a/drivers/regulator/mt6358-regulator.c
+++ b/drivers/regulator/mt6358-regulator.c
@@ -43,7 +43,7 @@ struct mt6358_regulator_info {
 	.desc = {	\
 		.name = #vreg,	\
 		.of_match = of_match_ptr(match),	\
-		.ops = &mt6358_volt_range_ops,	\
+		.ops = &mt6358_buck_ops,	\
 		.type = REGULATOR_VOLTAGE,	\
 		.id = MT6358_ID_##vreg,		\
 		.owner = THIS_MODULE,		\
@@ -139,7 +139,7 @@ struct mt6358_regulator_info {
 	.desc = {	\
 		.name = #vreg,	\
 		.of_match = of_match_ptr(match),	\
-		.ops = &mt6358_volt_range_ops,	\
+		.ops = &mt6358_buck_ops,	\
 		.type = REGULATOR_VOLTAGE,	\
 		.id = MT6366_ID_##vreg,		\
 		.owner = THIS_MODULE,		\
@@ -450,7 +450,7 @@ static unsigned int mt6358_regulator_get_mode(struct regulator_dev *rdev)
 	}
 }
 
-static const struct regulator_ops mt6358_volt_range_ops = {
+static const struct regulator_ops mt6358_buck_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -464,6 +464,18 @@ static const struct regulator_ops mt6358_volt_range_ops = {
 	.get_mode = mt6358_regulator_get_mode,
 };
 
+static const struct regulator_ops mt6358_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = mt6358_get_buck_voltage_sel,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6358_get_status,
+};
+
 static const struct regulator_ops mt6358_volt_table_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_iterate,
-- 
2.42.0.459.ge4e396fd5e-goog




More information about the linux-arm-kernel mailing list