[PATCH v2 14/17] pmdomain: sunxi: Move Kconfig option to the pmdomain subsystem

[Ulf Hansson]

The Kconfig option belongs closer to the corresponding implementation,
hence let's move it from the soc subsystem to the pmdomain subsystem.

Cc: Chen-Yu Tsai <wens at csie.org>
Cc: Jernej Skrabec <jernej.skrabec at gmail.com>
Cc: Samuel Holland <samuel at sholland.org>
Cc: <linux-sunxi at lists.linux.dev>
Acked-by: Jernej Skrabec <jernej.skrabec at gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
---
 drivers/pmdomain/Kconfig       |  1 +
 drivers/pmdomain/sunxi/Kconfig | 10 ++++++++++
 drivers/soc/sunxi/Kconfig      |  9 ---------
 3 files changed, 11 insertions(+), 9 deletions(-)
 create mode 100644 drivers/pmdomain/sunxi/Kconfig

diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
index 2286c36076db..10c3bc2e2444 100644
--- a/drivers/pmdomain/Kconfig
+++ b/drivers/pmdomain/Kconfig
@@ -13,5 +13,6 @@ source "drivers/pmdomain/rockchip/Kconfig"
 source "drivers/pmdomain/samsung/Kconfig"
 source "drivers/pmdomain/st/Kconfig"
 source "drivers/pmdomain/starfive/Kconfig"
+source "drivers/pmdomain/sunxi/Kconfig"
 
 endmenu
diff --git a/drivers/pmdomain/sunxi/Kconfig b/drivers/pmdomain/sunxi/Kconfig
new file mode 100644
index 000000000000..17781bf8d86d
--- /dev/null
+++ b/drivers/pmdomain/sunxi/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config SUN20I_PPU
+	bool "Allwinner D1 PPU power domain driver"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on PM
+	select PM_GENERIC_DOMAINS
+	help
+	  Say y to enable the PPU power domain driver. This saves power
+	  when certain peripherals, such as the video engine, are idle.
diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index c5070914fc6a..8aecbc9b1976 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -19,12 +19,3 @@ config SUNXI_SRAM
 	  Say y here to enable the SRAM controller support. This
 	  device is responsible on mapping the SRAM in the sunXi SoCs
 	  whether to the CPU/DMA, or to the devices.
-
-config SUN20I_PPU
-	bool "Allwinner D1 PPU power domain driver"
-	depends on ARCH_SUNXI || COMPILE_TEST
-	depends on PM
-	select PM_GENERIC_DOMAINS
-	help
-	  Say y to enable the PPU power domain driver. This saves power
-	  when certain peripherals, such as the video engine, are idle.
-- 
2.34.1