[PATCH net-next 3/6] net: stmmac: intel-plat: use stmmac_set_tx_clk_gmii()

[Serge Semin]

On Thu, Sep 14, 2023 at 02:51:30PM +0100, Russell King (Oracle) wrote:
> Use stmmac_set_tx_clk_gmii().
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>

Reviewed-by: Serge Semin <fancer.lancer at gmail.com>

-Serge(y)

> ---
>  .../stmicro/stmmac/dwmac-intel-plat.c         | 34 +++++--------------
>  1 file changed, 8 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
> index d352a14f9d48..c6ebd1d91f38 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
> @@ -31,32 +31,14 @@ struct intel_dwmac_data {
>  static void kmb_eth_fix_mac_speed(void *priv, unsigned int speed, unsigned int mode)
>  {
>  	struct intel_dwmac *dwmac = priv;
> -	unsigned long rate;
> -	int ret;
> -
> -	rate = clk_get_rate(dwmac->tx_clk);
> -
> -	switch (speed) {
> -	case SPEED_1000:
> -		rate = 125000000;
> -		break;
> -
> -	case SPEED_100:
> -		rate = 25000000;
> -		break;
> -
> -	case SPEED_10:
> -		rate = 2500000;
> -		break;
> -
> -	default:
> -		dev_err(dwmac->dev, "Invalid speed\n");
> -		break;
> -	}
> -
> -	ret = clk_set_rate(dwmac->tx_clk, rate);
> -	if (ret)
> -		dev_err(dwmac->dev, "Failed to configure tx clock rate\n");
> +	int err;
> +
> +	err = stmmac_set_tx_clk_gmii(dwmac->tx_clk, speed);
> +	if (err == -ENOTSUPP)
> +		dev_err(dwmac->dev, "invalid speed %uMbps\n", speed);
> +	else if (err)
> +		dev_err(dwmac->dev, "failed to set tx rate for speed %uMbps: %pe\n",
> +			speed, ERR_PTR(err));
>  }
>  
>  static const struct intel_dwmac_data kmb_data = {
> -- 
> 2.30.2
> 
>