[PATCH V2 6/7] arm64: dts: qcom: ipq9574: Add support for nsscc node

[Devi Priya]

On 8/25/2023 4:58 PM, Dmitry Baryshkov wrote:
> On Fri, 25 Aug 2023 at 12:15, Devi Priya <quic_devipriy at quicinc.com> wrote:
>>
>> Add a node for the nss clock controller found on ipq9574 based devices.
>>
>> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>> ---
>>   Changes in V2:
>>          - Dropped the fixed clock node gcc_gpll0_out_aux and added
>>            support for the same in gcc driver
>>          - Updated the node name to clock-controller at 39b00000
>>          - Added clock-names to retrieve the nssnoc clocks and add them
>>            to the list of pm clocks in nss driver
>>
>>   arch/arm64/boot/dts/qcom/ipq9574.dtsi | 48 +++++++++++++++++++++++++++
>>   1 file changed, 48 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> index 51aba071c1eb..903311547e96 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> @@ -10,6 +10,8 @@
>>   #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
>> +#include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
>> +#include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
>>   #include <dt-bindings/thermal/thermal.h>
>>
>>   / {
>> @@ -18,6 +20,24 @@ / {
>>          #size-cells = <2>;
>>
>>          clocks {
>> +               bias_pll_cc_clk: bias-pll-cc-clk {
>> +                       compatible = "fixed-clock";
>> +                       clock-frequency = <1200000000>;
>> +                       #clock-cells = <0>;
>> +               };
>> +
>> +               bias_pll_nss_noc_clk: bias-pll-nss-noc-clk {
>> +                       compatible = "fixed-clock";
>> +                       clock-frequency = <461500000>;
>> +                       #clock-cells = <0>;
>> +               };
>> +
>> +               bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
>> +                       compatible = "fixed-clock";
>> +                       clock-frequency = <353000000>;
>> +                       #clock-cells = <0>;
>> +               };
> 
> Which part provides these clocks?
The Bias PLL generates these clocks based on the reference clock.
> 
>> +
>>                  sleep_clk: sleep-clk {
>>                          compatible = "fixed-clock";
>>                          #clock-cells = <0>;
>> @@ -722,6 +742,34 @@ frame at b128000 {
>>                                  status = "disabled";
>>                          };
>>                  };
>> +
>> +               nsscc: clock-controller at 39b00000 {
>> +                       compatible = "qcom,ipq9574-nsscc";
>> +                       reg = <0x39b00000 0x80000>;
>> +                       clocks = <&gcc GCC_NSSNOC_NSSCC_CLK>,
>> +                                <&gcc GCC_NSSNOC_SNOC_CLK>,
>> +                                <&gcc GCC_NSSNOC_SNOC_1_CLK>,
>> +                                <&bias_pll_cc_clk>,
>> +                                <&bias_pll_nss_noc_clk>,
>> +                                <&bias_pll_ubi_nc_clk>,
>> +                                <&gcc GPLL0_OUT_AUX>,
>> +                                <0>,
>> +                                <0>,
>> +                                <0>,
>> +                                <0>,
>> +                                <0>,
>> +                                <0>,
>> +                                <&xo_board_clk>;
> 
> If you move xo_board closer to the start of the list, it will be
> slightly easier to review.
Sure okay
> 
>> +                       clock-names = "nssnoc_nsscc", "nssnoc_snoc", "nssnoc_snoc_1",
>> +                                     "bias_pll_cc_clk", "bias_pll_nss_noc_clk",
>> +                                     "bias_pll_ubi_nc_clk", "gpll0_out_aux", "uniphy0_nss_rx_clk",
>> +                                     "uniphy0_nss_tx_clk", "uniphy1_nss_rx_clk",
>> +                                     "uniphy1_nss_tx_clk", "uniphy2_nss_rx_clk",
>> +                                     "uniphy2_nss_tx_clk", "xo_board_clk";
> 
> You are using clock indices. Please drop clock-names.
Sure okay

Thanks,
Devi Priya
> 
>> +                       #clock-cells = <1>;
>> +                       #reset-cells = <1>;
>> +                       #power-domain-cells = <1>;
>> +               };
>>          };
>>
>>          thermal-zones {
>> --
>> 2.34.1
>>
> 
>