[PATCH 2/2] arm64: dts: imx8-apalis-v1.1: Remove invalid GPIO properties

[Marcel Ziswiler]

On Thu, 2023-09-07 at 22:44 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam at denx.de>
> 
> Per fsl-imx-gpio.yaml, 'pad-wakeup' and 'pad-wakeup-num' are not
> valid properties/
> 
> Remove them to fix the following schema warning:
> 
> imx8qm-apalis-ixora-v1.1.dtb: gpio at 5d0a0000: 'pad-wakeup', 'pad-wakeup-num' do not match any of the regexes:
> '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
>         from schema $id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml#
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>

Reviewed-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

> ---
>  arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi | 9 ---------
>  1 file changed, 9 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-
> v1.1.dtsi
> index 9b1b522517f8..7ce342007836 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
> @@ -503,15 +503,6 @@ &lsio_gpio2 {
>                           "MXM3_185",
>                           "MXM3_187";
>  
> -       /*
> -        * Add GPIO2_20 as a wakeup source:
> -        * Pin:  101    SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO)
> -        * Type: 5      SC_PAD_WAKEUP_FALL_EDGE
> -        * Line: 20
> -        */
> -       pad-wakeup = <IMX8QM_SPI3_CS0 5 20>;
> -       pad-wakeup-num = <1>;
> -
>         pcie-wifi-hog {
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;