[PATCH 2/2] arm64: dts: imx8mp: add reserve-memory nodes for DSP

[Marco Felsch]

Hi Iuliana,

On 23-09-12, Iuliana Prodan (OSS) wrote:
> From: Iuliana Prodan <iuliana.prodan at nxp.com>
> 
> Add the reserve-memory nodes used by DSP when the rpmsg
> feature is enabled.
> These can be later used in a dsp node, like:
> dsp: dsp at 3b6e8000 {
> 	compatible = "fsl,imx8mp-dsp";
> 	reg = <0x3b6e8000 0x88000>;
> 	mbox-names = "tx0", "rx0", "rxdb0";
> 	mboxes = <&mu2 2 0>, <&mu2 2 1>,
> 		<&mu2 3 0>, <&mu2 3 1>;
> 	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
> 		<&dsp_vdev0vring1>, <&dsp_reserved>;
> 	status = "okay";
> };
> 
> Signed-off-by: Iuliana Prodan <iuliana.prodan at nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index cc406bb338fe..eedc1921af62 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -210,6 +210,18 @@
>  		dsp_reserved: dsp at 92400000 {
>  			reg = <0 0x92400000 0 0x2000000>;
>  			no-map;

This seems broken.

Regards,
  Marco

> +		dsp_vdev0vring0: vdev0vring0 at 942f0000 {
> +			reg = <0 0x942f0000 0 0x8000>;
> +			no-map;
> +		};
> +		dsp_vdev0vring1: vdev0vring1 at 942f8000 {
> +			reg = <0 0x942f8000 0 0x8000>;
> +			no-map;
> +		};
> +		dsp_vdev0buffer: vdev0buffer at 94300000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0 0x94300000 0 0x100000>;
> +			no-map;
>  		};
>  	};
>  
> -- 
> 2.17.1
> 
> 
>