[PATCH 3/3] arm64: dts: imx8qxp-mek: Pass gpio-sbu-mux mode-switch

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Per gpio-sbu-mux.yaml, the 'mode-switch' property is mandatory.

Pass it to fix the following schema warning:

imx8qxp-mek.dtb: gpio-sbu-mux: 'mode-switch' is a required property
	from schema $id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml#

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index a06a6491ef20..f95b58c69c6a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -36,6 +36,7 @@ gpio-sbu-mux {
 		pinctrl-0 = <&pinctrl_typec_mux>;
 		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
 		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
+		mode-switch;
 		orientation-switch;
 
 		port {
-- 
2.34.1