[PATCH v2] pinctrl: sunxi: h616: add extra gpio banks

[Samuel Holland]

On 9/9/23 04:45, Mikhail Kalashnikov wrote:
> From: iuncuim <iuncuim at gmail.com>
> 
> Some SoCs from the H616 family (such as the T507) have the same die but
> more output pins that are used for additional peripherals. The T507 SoC
> don't have a built-in multiphy like the AC200 or AC300 connected ti the

typo: to

> bank A. With the T507 these pins can be freely used for any other application.
> This patch adds the missing muxes on banks A, D and E.
> 
> Signed-off-by: Mikhail Kalashnikov <iuncuim at gmail.com>
> ---
>  drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c | 380 +++++++++++++++++++-
>  1 file changed, 366 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c
> index d6ca720ee..10d4e1ef1 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h616.c
> @@ -16,33 +16,81 @@
>  #include "pinctrl-sunxi.h"
>  
>  static const struct sunxi_desc_pin h616_pins[] = {
> -	/* Internal connection to the AC200 part */
> +	/* Internally connected to the AC200 part in the H616 SoC */
>  	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 0),
> -		  SUNXI_FUNCTION(0x2, "emac1")),	/* ERXD1 */
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "emac1"),		/* ERXD1 */
> +		  SUNXI_FUNCTION(0x4, "i2c0"),		/* SCK */
> +		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)),	/* PA_EINT0 */
>  	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 1),
> -		  SUNXI_FUNCTION(0x2, "emac1")),	/* ERXD0 */
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "emac1"),		/* ERXD0 */
> +		  SUNXI_FUNCTION(0x4, "i2c0"),		/* SDA */
> +		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)),	/* PA_EINT1 */
>  	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 2),
> -		  SUNXI_FUNCTION(0x2, "emac1")),	/* ECRS_DV */
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "emac1"),		/* ECRS_DV */
> +		  SUNXI_FUNCTION(0x4, "i2c1"),		/* SCK */
> +		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)),	/* PA_EINT2 */
>  	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 3),
> -		  SUNXI_FUNCTION(0x2, "emac1")),	/* ERXERR */
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "emac1"),		/* ERXERR */
> +		  SUNXI_FUNCTION(0x4, "i2c1"),		/* SDA */
> +		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)),	/* PA_EINT3 */
>  	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 4),
> -		  SUNXI_FUNCTION(0x2, "emac1")),	/* ETXD1 */
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "emac1"),		/* ETXD1 */
> +		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)),	/* PA_EINT4 */
>  	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 5),
> -		  SUNXI_FUNCTION(0x2, "emac1")),	/* ETXD0 */
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "emac1"),		/* ETXD0 */
> +		  SUNXI_FUNCTION(0x3, "h_i2s0"),	/* DOUT0 */

For H616 we chose[1] to remove the "h_" prefix from the I2S function
names, even though the interfaces are part of the audio hub and not
discrete devices. Please remove it here as well for consistency.

Regards,
Samuel

[1]:
https://lore.kernel.org/linux-arm-kernel/20201214094430.m6h3pzhkm3kjl2cl@gilmour/