[PATCH 2/2] ARM: dts: ixp4xx: Use right restart keycode

Linus Walleij linus.walleij at linaro.org
Fri Sep 8 03:49:49 PDT 2023


The "reset" key on a few IXP4xx routers were sending KEY_ESC
but what we want to send is KEY_RESTART which will make
OpenWrt and similar userspace do a controlled reboot.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts | 2 +-
 arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts  | 2 +-
 arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts | 2 +-
 arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts  | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
index b9d46eb06507..fa133c913606 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-dlink-dsm-g600.dts
@@ -57,7 +57,7 @@ gpio_keys {
 
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
index 5a5e16cc7335..73d3c11dd0d4 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-freecom-fsg-3.dts
@@ -44,7 +44,7 @@ button-sync {
 		};
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
index 8da6823e1dbe..26f02dad6a54 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-iomega-nas100d.dts
@@ -63,7 +63,7 @@ button-power {
 		};
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
index 706ba531faf0..2eec5f63d399 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts
@@ -65,7 +65,7 @@ button-power {
 		};
 		button-reset {
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 		};

-- 
2.41.0




More information about the linux-arm-kernel mailing list