[PATCH] arm64: dts: imx8mq-nitrogen: Fix PCA9546 I2C subnodes

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Per i2c-mux-pca954x.yaml, the PCA9546 I2C subnodes should be in the
'i2c@' format.

Change it accordingly to fix the following schema warning:

imx8mm-nitrogen-r2.dtb: i2c-mux at 70: Unevaluated properties are not allowed ('i2c3 at 0' was unexpected)

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 8614c18b5998..767819cce886 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -142,7 +142,7 @@ i2c-mux at 70 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c1a: i2c1 at 0 {
+		i2c1a: i2c at 0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -159,7 +159,7 @@ reg_arm_dram: regulator at 60 {
 			};
 		};
 
-		i2c1b: i2c1 at 1 {
+		i2c1b: i2c at 1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -176,7 +176,7 @@ reg_dram_1p1v: regulator at 60 {
 			};
 		};
 
-		i2c1c: i2c1 at 2 {
+		i2c1c: i2c at 2 {
 			reg = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -193,7 +193,7 @@ reg_soc_gpu_vpu: regulator at 60 {
 			};
 		};
 
-		i2c1d: i2c1 at 3 {
+		i2c1d: i2c at 3 {
 			reg = <3>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -222,7 +222,7 @@ pca9546: i2c-mux at 70 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c4 at 0 {
+		i2c at 0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -257,14 +257,14 @@ lt8912_out: endpoint {
 			};
 		};
 
-		ddc_i2c_bus: i2c4 at 1 {
+		ddc_i2c_bus: i2c at 1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clock-frequency = <100000>;
 		};
 
-		i2c4 at 3 {
+		i2c at 3 {
 			reg = <3>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.34.1