[PATCH 3/3] arm64: dts: mediatek: mt8365-pumpkin: Add overlays for thp7312 cameras

[Laurent Pinchart]

Hi Krzysztof,

On Wed, Sep 06, 2023 at 09:27:07AM +0200, Krzysztof Kozlowski wrote:
> On 06/09/2023 01:31, Paul Elder wrote:
> > Add overlays for the Pumpkin i350 to support THP7312 cameras.
> > 
> > Signed-off-by: Paul Elder <paul.elder at ideasonboard.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/Makefile         |  4 +
> >  .../mt8365-pumpkin-common-thp7312.dtsi        | 23 ++++++
> >  .../mt8365-pumpkin-csi0-thp7312-imx258.dtso   | 73 +++++++++++++++++++
> >  .../mt8365-pumpkin-csi1-thp7312-imx258.dtso   | 73 +++++++++++++++++++
> >  4 files changed, 173 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi1-thp7312-imx258.dtso
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> > index 20570bc40de8..ceaf24105001 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -56,4 +56,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-pumpkin.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> >  
> > +mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-csi0-thp7312-imx258.dtbo
> > +mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-csi1-thp7312-imx258.dtbo
> >  mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-ethernet-usb.dtbo
> > +
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mtk-mt8365-pumpkin.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
> > new file mode 100644
> > index 000000000000..478697552617
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
> > @@ -0,0 +1,23 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2023 Ideas on Board
> > + * Author: Paul Elder <paul.elder at ideasonboard.com>
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +&{/} {
> > +	vsys_v4p2: regulator at 0 {
> 
> Hm? Is this a bus?

There are multiple instances of "numbered" regulators in upstream DT
files, for instance arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
has a regulator at 0. There are similar instances for clocks.

I understand why it may not be a good idea, and how the root node is
indeed not a bus. In some cases, those regulators and clocks are grouped
in a regulators or clocks node that has a "simple-bus" compatible. I'm
not sure if that's a good idea, but at least it should validate.

What's the best practice for discrete board-level clocks and regulators
in overlays ? How do we ensure that their node name will not conflict
with the board to which the overlay is attached ?

> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vsys-v4p2";
> > +		regulator-min-microvolt = <4200000>;
> > +		regulator-max-microvolt = <4200000>;
> > +	};
> > +
> > +	camera61_clk: cam_clk24m {
> 
> And this is not on a bus? It's the same / node!
> 
> Please work on mainline, which means take mainline code and change it to
> your needs. Do not take downstream poor code and change it...
> 
> No underscores in node names. Also generic node names, so at least with
> generic prefix or suffix.
> 
> > +		compatible = "fixed-clock";
> > +		clock-frequency = <24000000>;
> > +		#clock-cells = <0>;
> > +	};
> > +};
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso
> > new file mode 100644
> > index 000000000000..740d14a19d75
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso
> > @@ -0,0 +1,73 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2023 Ideas on Board
> > + * Author: Paul Elder <paul.elder at ideasonboard.com>
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
> > +#include "mt8365-pumpkin-common-thp7312.dtsi"
> > +
> > +&i2c3 {
> > +	camera at 61 {
> > +		compatible = "thine,thp7312";
> > +		reg = <0x61>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&cam0_pins_default>;
> > +		reset-gpios = <&pio 118 GPIO_ACTIVE_LOW>;
> > +		clocks = <&camera61_clk>;
> > +
> > +		vddcore-supply = <&vsys_v4p2>;
> > +		vhtermrx-supply = <&vsys_v4p2>;
> > +		vddtx-supply = <&vsys_v4p2>;
> > +		vddhost-supply = <&vsys_v4p2>;
> > +		vddcmos-supply = <&vsys_v4p2>;
> > +		vddgpio_0-supply = <&vsys_v4p2>;
> > +		vddgpio_1-supply = <&vsys_v4p2>;
> > +		DOVDD-supply = <&vsys_v4p2>;
> > +		AVDD-supply = <&vsys_v4p2>;
> > +		DVDD-supply = <&vsys_v4p2>;
> > +
> > +		orientation = <0>;
> > +		rotation = <0>;
> > +
> > +		thine,rx,data-lanes = <4 1 3 2>;
> 
> NAK for this property.

Please explain why. You commented very briefly in the bindings review,
and it wasn't clear to me if you were happy or not with the property,
and if not, why.

> > +
> > +		port {
> > +			isp1_out: endpoint {
> > +				remote-endpoint = <&seninf_in1>;
> > +				data-lanes = <4 2 1 3>;
> > +			};
> > +		};
> > +	};
> > +};
> > +
> > +&pio {
> > +	cam0_pins_default: cam0_pins_default {
> 
> No underscores in node names.
> 
> > +		pins_rst {
> 
> Ditto

-- 
Regards,

Laurent Pinchart