[PATCH] arm64: dts: imx8mq-thor96: Fix sdio-pwrseq GPIO property

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

As per mmc-pwrseq-simple.yaml, the correct way to describe the GPIO
is by using the 'reset-gpios' property.

Change it accordingly to fix the following schema warning: 

imx8mq-thor96.dtb: sdio-pwrseq: 'gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml#

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 6e6182709d22..eaa9d0c0fcc1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -107,7 +107,7 @@ sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi_reg_on>;
-		gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 
-- 
2.34.1