[PATCH 1/2] dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property

[Lorenzo Pieralisi]

The GIC v3 specifications allow redistributors and ITSes interconnect
ports used to access memory to be wired up in a way that makes the
respective initiators/memory observers non-coherent.

Add the standard dma-noncoherent property to the GICv3 bindings to
allow firmware to describe the redistributors/ITSes components and
interconnect ports behaviour in system designs where the redistributors
and ITSes are not coherent with the CPU.

Signed-off-by: Lorenzo Pieralisi <lpieralisi at kernel.org>
Cc: Rob Herring <robh at kernel.org>
---
 .../bindings/interrupt-controller/arm,gic-v3.yaml         | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index 39e64c7f6360..0a81ae4519a6 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -106,6 +106,10 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 4096
 
+  dma-noncoherent:
+    description: |
+      Present if the GIC redistributors are not cache coherent with the CPU.
+
   msi-controller:
     description:
       Only present if the Message Based Interrupt functionality is
@@ -193,6 +197,10 @@ patternProperties:
       compatible:
         const: arm,gic-v3-its
 
+      dma-noncoherent:
+        description: |
+          Present if the GIC ITS is not cache coherent with the CPU.
+
       msi-controller: true
 
       "#msi-cells":
-- 
2.34.1