[linux][PATCH] counter: microchip-tcb-capture: Fix the use of internal GCLK logic

[Dharma Balasubiramani]

As per the datasheet, the clock selection Bits 2:0 – TCCLKS[2:0] should
be set to 0 while using the internal GCLK (TIMER_CLOCK1).

Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Signed-off-by: Dharma Balasubiramani <dharma.b at microchip.com>
---
 drivers/counter/microchip-tcb-capture.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
index e2d1dc6ca668..c7af13aca36c 100644
--- a/drivers/counter/microchip-tcb-capture.c
+++ b/drivers/counter/microchip-tcb-capture.c
@@ -98,7 +98,7 @@ static int mchp_tc_count_function_write(struct counter_device *counter,
 		priv->qdec_mode = 0;
 		/* Set highest rate based on whether soc has gclk or not */
 		bmr &= ~(ATMEL_TC_QDEN | ATMEL_TC_POSEN);
-		if (priv->tc_cfg->has_gclk)
+		if (!priv->tc_cfg->has_gclk)
 			cmr |= ATMEL_TC_TIMER_CLOCK2;
 		else
 			cmr |= ATMEL_TC_TIMER_CLOCK1;
-- 
2.25.1