[PATCH v2 11/12] riscv: dts: starfive: visionfive-v1: Enable gmac and setup phy

[Cristian Ciocaltea]

On 10/30/23 00:50, Andrew Lunn wrote:
> On Mon, Oct 30, 2023 at 12:41:23AM +0200, Cristian Ciocaltea wrote:
>> On 10/29/23 20:45, Andrew Lunn wrote:
>>> On Sun, Oct 29, 2023 at 06:27:11AM +0200, Cristian Ciocaltea wrote:
>>>> The StarFive VisionFive V1 SBC has a Motorcomm YT8521 PHY supporting
>>>> RGMII-ID, but requires manual adjustment of the RX internal delay to
>>>> work properly.
>>>>
>>>> The default RX delay provided by the driver is 1.95 ns, which proves to
>>>> be too high. Applying a 50% reduction seems to mitigate the issue.
>>>
>>> I'm not so happy this cannot be explained. You are potentially heading
>>> into horrible backwards compatibility problems with old DT blobs and
>>> new kernels once this is explained and fixed.
>>
>> It seems the visionfive-v2 board also required setting some delays, but
>> unfortunately no details were provided:
>>
>> 0104340a67b1 ("riscv: dts: starfive: visionfive 2: Add configuration of
>> mac and phy")
> 
> That board also uses a YT8531 PHY. Its possible this is somehow to do
> with the PHY. Which is why testing with the Microchip PHY is
> important. That should answer the question is it a SoC or a PHY
> problem.

There is also YT8531S, which looks compatible with YT8521, but YT8531
seems to be a bit different. Regardless of what VisionFive v2 is using,
it would be indeed interesting to find out how the Microchip PHY behaves
in this context.

Regards,
Cristian