[PATCH net-next v6 2/7] dt-bindings: net: mvusb: Fix up DSA example

[Linus Walleij]

When adding a proper schema for the Marvell mx88e6xxx switch,
the scripts start complaining about this embedded example:

  dtschema/dtc warnings/errors:
  net/marvell,mvusb.example.dtb: switch at 0: ports: '#address-cells'
  is a required property
  from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
  net/marvell,mvusb.example.dtb: switch at 0: ports: '#size-cells'
  is a required property
  from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#

Fix this up by extending the example with those properties in
the ports node.

While we are at it, rename "ports" to "ethernet-ports" and rename
"switch" to "ethernet-switch" as this is recommended practice.

Reviewed-by: Andrew Lunn <andrew at lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean at nxp.com>
Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
index 3a3325168048..ab838c1ffeed 100644
--- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -50,11 +50,14 @@ examples:
                     #address-cells = <1>;
                     #size-cells = <0>;
 
-                    switch at 0 {
+                    ethernet-switch at 0 {
                             compatible = "marvell,mv88e6190";
                             reg = <0x0>;
 
-                            ports {
+                            ethernet-ports {
+                                    #address-cells = <1>;
+                                    #size-cells = <0>;
+
                                     /* Port definitions */
                             };
 

-- 
2.34.1