[PATCH v3 01/11] pwm: atmel-hlcdc: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions

[Nicolas Ferre]

On 23/10/2023 at 19:46, Uwe Kleine-König wrote:
> This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
> care about when the functions are actually used, so the corresponding
> #ifdef can be dropped.
> 
> Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
> isn't enabled.
> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>

Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>

> ---
>   drivers/pwm/pwm-atmel-hlcdc.c | 8 +++-----
>   1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
> index 07920e034757..3f2c5031a3ba 100644
> --- a/drivers/pwm/pwm-atmel-hlcdc.c
> +++ b/drivers/pwm/pwm-atmel-hlcdc.c
> @@ -180,7 +180,6 @@ static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
>          .div1_clk_erratum = true,
>   };
> 
> -#ifdef CONFIG_PM_SLEEP
>   static int atmel_hlcdc_pwm_suspend(struct device *dev)
>   {
>          struct atmel_hlcdc_pwm *atmel = dev_get_drvdata(dev);
> @@ -210,10 +209,9 @@ static int atmel_hlcdc_pwm_resume(struct device *dev)
>          return atmel_hlcdc_pwm_apply(&atmel->chip, &atmel->chip.pwms[0],
>                                       &state);
>   }
> -#endif
> 
> -static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
> -                        atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
> +static DEFINE_SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
> +                               atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
> 
>   static const struct of_device_id atmel_hlcdc_dt_ids[] = {
>          {
> @@ -297,7 +295,7 @@ static struct platform_driver atmel_hlcdc_pwm_driver = {
>          .driver = {
>                  .name = "atmel-hlcdc-pwm",
>                  .of_match_table = atmel_hlcdc_pwm_dt_ids,
> -               .pm = &atmel_hlcdc_pwm_pm_ops,
> +               .pm = pm_ptr(&atmel_hlcdc_pwm_pm_ops),
>          },
>          .probe = atmel_hlcdc_pwm_probe,
>          .remove_new = atmel_hlcdc_pwm_remove,
> --
> 2.42.0
>