[PATCH] ARM: dts: BCM5301X: Set switch ports for Linksys EA9200

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

This patch was developed as OpenWrt downstream change and was recently
confirmed to work as expected.

Tested-by: Rani Hod <rani.hod at gmail.com>
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 .../dts/broadcom/bcm4709-linksys-ea9200.dts   | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
index 99253fd7adb3..2ba5adf2b7e7 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -47,3 +47,41 @@ button-restart {
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port at 0 {
+			label = "lan1";
+		};
+
+		port at 1 {
+			label = "lan2";
+		};
+
+		port at 2 {
+			label = "lan3";
+		};
+
+		port at 3 {
+			label = "lan4";
+		};
+
+		port at 4 {
+			label = "wan";
+		};
+
+		port at 5 {
+			status = "disabled";
+		};
+
+		port at 7 {
+			status = "disabled";
+		};
+
+		port at 8 {
+			label = "cpu";
+		};
+	};
+};
-- 
2.35.3