[PATCH] pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable

[Maíra Canal]

The commit c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control")
refactored the ASB control by using a general function to handle both
the enable and disable. But this patch introduced a subtle regression:
we need to check if (readl(base + reg) & ASB_ACK) == enable, not just
check if (readl(base + reg) & ASB_ACK) == true.

Currently, this is causing an invalid register state in V3D when
unloading and loading the driver, because `bcm2835_asb_disable()` will
return -ETIMEDOUT and `bcm2835_asb_power_off()` will fail to disable the
ASB slave for V3D.

Fixes: c494a447c14e ("soc: bcm: bcm2835-power: Refactor ASB control")
Signed-off-by: Maíra Canal <mcanal at igalia.com>
---
 drivers/pmdomain/bcm/bcm2835-power.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pmdomain/bcm/bcm2835-power.c b/drivers/pmdomain/bcm/bcm2835-power.c
index 1a179d4e011c..2d3636bc277e 100644
--- a/drivers/pmdomain/bcm/bcm2835-power.c
+++ b/drivers/pmdomain/bcm/bcm2835-power.c
@@ -175,7 +175,7 @@ static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable
 	}
 	writel(PM_PASSWORD | val, base + reg);

-	while (readl(base + reg) & ASB_ACK) {
+	while ((readl(base + reg) & ASB_ACK) == enable) {
 		cpu_relax();
 		if (ktime_get_ns() - start >= 1000)
 			return -ETIMEDOUT;
--
2.41.0