[PATCH net-next v5 3/7] ARM: dts: marvell: Fix some common switch mistakes
Linus Walleij
linus.walleij at linaro.org
Mon Oct 23 00:18:54 PDT 2023
Fix some errors in the Marvell MV88E6xxx switch descriptions:
- The top node had no address size or cells.
- switch0 at 0 is not OK, should be ethernet-switch at 0.
- The ports node should be named ethernet-ports
- The ethernet-ports node should have port at 0 etc children, no
plural "ports" in the children.
- Ports should be named ethernet-port at 0 etc
- PHYs should be named ethernet-phy at 0 etc
This serves as an example of fixes needed for introducing a
schema for the bindings, but the patch can simply be applied.
Reviewed-by: Andrew Lunn <andrew at lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/boot/dts/marvell/armada-370-rd.dts | 24 ++++++------
.../dts/marvell/armada-381-netgear-gs110emx.dts | 44 +++++++++++-----------
.../dts/marvell/armada-385-clearfog-gtr-l8.dts | 38 +++++++++----------
.../dts/marvell/armada-385-clearfog-gtr-s4.dts | 22 +++++------
arch/arm/boot/dts/marvell/armada-385-linksys.dtsi | 18 ++++-----
.../boot/dts/marvell/armada-385-turris-omnia.dts | 20 +++++-----
arch/arm/boot/dts/marvell/armada-388-clearfog.dts | 20 +++++-----
.../boot/dts/marvell/armada-xp-linksys-mamba.dts | 18 ++++-----
8 files changed, 96 insertions(+), 108 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index b459a670f615..1b241da11e94 100644
--- a/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -149,39 +149,37 @@ led at 0 {
};
};
- switch: switch at 10 {
+ switch: ethernet-switch at 10 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x10>;
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port at 0 {
+ ethernet-port at 0 {
reg = <0>;
label = "lan0";
};
- port at 1 {
+ ethernet-port at 1 {
reg = <1>;
label = "lan1";
};
- port at 2 {
+ ethernet-port at 2 {
reg = <2>;
label = "lan2";
};
- port at 3 {
+ ethernet-port at 3 {
reg = <3>;
label = "lan3";
};
- port at 5 {
+ ethernet-port at 5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "rgmii-id";
@@ -196,25 +194,25 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
- switchphy0: switchphy at 0 {
+ switchphy0: ethernet-phy at 0 {
reg = <0>;
interrupt-parent = <&switch>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy1: switchphy at 1 {
+ switchphy1: ethernet-phy at 1 {
reg = <1>;
interrupt-parent = <&switch>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy2: switchphy at 2 {
+ switchphy2: ethernet-phy at 2 {
reg = <2>;
interrupt-parent = <&switch>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy3: switchphy at 3 {
+ switchphy3: ethernet-phy at 3 {
reg = <3>;
interrupt-parent = <&switch>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
index f4c4b213ef4e..5baf83e5253d 100644
--- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@ &mdio {
pinctrl-0 = <&mdio_pins>;
status = "okay";
- switch at 0 {
+ ethernet-switch at 0 {
compatible = "marvell,mv88e6190";
- #address-cells = <1>;
#interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio1>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&switch_interrupt_pins>;
pinctrl-names = "default";
- #size-cells = <0>;
reg = <0>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
- switch0phy1: switch0phy1 at 1 {
+ switch0phy1: ethernet-phy at 1 {
reg = <0x1>;
};
- switch0phy2: switch0phy2 at 2 {
+ switch0phy2: ethernet-phy at 2 {
reg = <0x2>;
};
- switch0phy3: switch0phy3 at 3 {
+ switch0phy3: ethernet-phy at 3 {
reg = <0x3>;
};
- switch0phy4: switch0phy4 at 4 {
+ switch0phy4: ethernet-phy at 4 {
reg = <0x4>;
};
- switch0phy5: switch0phy5 at 5 {
+ switch0phy5: ethernet-phy at 5 {
reg = <0x5>;
};
- switch0phy6: switch0phy6 at 6 {
+ switch0phy6: ethernet-phy at 6 {
reg = <0x6>;
};
- switch0phy7: switch0phy7 at 7 {
+ switch0phy7: ethernet-phy at 7 {
reg = <0x7>;
};
- switch0phy8: switch0phy8 at 8 {
+ switch0phy8: ethernet-phy at 8 {
reg = <0x8>;
};
};
@@ -142,11 +140,11 @@ phy2: ethernet-phy at c {
};
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port at 0 {
+ ethernet-port at 0 {
ethernet = <ð0>;
phy-mode = "rgmii";
reg = <0>;
@@ -158,55 +156,55 @@ fixed-link {
};
};
- port at 1 {
+ ethernet-port at 1 {
label = "lan1";
phy-handle = <&switch0phy1>;
reg = <1>;
};
- port at 2 {
+ ethernet-port at 2 {
label = "lan2";
phy-handle = <&switch0phy2>;
reg = <2>;
};
- port at 3 {
+ ethernet-port at 3 {
label = "lan3";
phy-handle = <&switch0phy3>;
reg = <3>;
};
- port at 4 {
+ ethernet-port at 4 {
label = "lan4";
phy-handle = <&switch0phy4>;
reg = <4>;
};
- port at 5 {
+ ethernet-port at 5 {
label = "lan5";
phy-handle = <&switch0phy5>;
reg = <5>;
};
- port at 6 {
+ ethernet-port at 6 {
label = "lan6";
phy-handle = <&switch0phy6>;
reg = <6>;
};
- port at 7 {
+ ethernet-port at 7 {
label = "lan7";
phy-handle = <&switch0phy7>;
reg = <7>;
};
- port at 8 {
+ ethernet-port at 8 {
label = "lan8";
phy-handle = <&switch0phy8>;
reg = <8>;
};
- port at 9 {
+ ethernet-port at 9 {
/* 88X3310P external phy */
label = "lan9";
phy-handle = <&phy1>;
@@ -214,7 +212,7 @@ port at 9 {
reg = <9>;
};
- port at a {
+ ethernet-port at a {
/* 88X3310P external phy */
label = "lan10";
phy-handle = <&phy2>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d0cc79..1707d1b01545 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,66 +7,66 @@ / {
};
&mdio {
- switch0: switch0 at 4 {
+ switch0: ethernet-switch at 4 {
compatible = "marvell,mv88e6190";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cf_gtr_switch_reset_pins>;
reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port at 1 {
+ ethernet-port at 1 {
reg = <1>;
label = "lan8";
phy-handle = <&switch0phy0>;
};
- port at 2 {
+ ethernet-port at 2 {
reg = <2>;
label = "lan7";
phy-handle = <&switch0phy1>;
};
- port at 3 {
+ ethernet-port at 3 {
reg = <3>;
label = "lan6";
phy-handle = <&switch0phy2>;
};
- port at 4 {
+ ethernet-port at 4 {
reg = <4>;
label = "lan5";
phy-handle = <&switch0phy3>;
};
- port at 5 {
+ ethernet-port at 5 {
reg = <5>;
label = "lan4";
phy-handle = <&switch0phy4>;
};
- port at 6 {
+ ethernet-port at 6 {
reg = <6>;
label = "lan3";
phy-handle = <&switch0phy5>;
};
- port at 7 {
+ ethernet-port at 7 {
reg = <7>;
label = "lan2";
phy-handle = <&switch0phy6>;
};
- port at 8 {
+ ethernet-port at 8 {
reg = <8>;
label = "lan1";
phy-handle = <&switch0phy7>;
};
- port at 10 {
+ ethernet-port at 10 {
reg = <10>;
phy-mode = "2500base-x";
@@ -83,35 +83,35 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0 at 1 {
+ switch0phy0: ethernet-phy at 1 {
reg = <0x1>;
};
- switch0phy1: switch0phy1 at 2 {
+ switch0phy1: ethernet-phy at 2 {
reg = <0x2>;
};
- switch0phy2: switch0phy2 at 3 {
+ switch0phy2: ethernet-phy at 3 {
reg = <0x3>;
};
- switch0phy3: switch0phy3 at 4 {
+ switch0phy3: ethernet-phy at 4 {
reg = <0x4>;
};
- switch0phy4: switch0phy4 at 5 {
+ switch0phy4: ethernet-phy at 5 {
reg = <0x5>;
};
- switch0phy5: switch0phy5 at 6 {
+ switch0phy5: ethernet-phy at 6 {
reg = <0x6>;
};
- switch0phy6: switch0phy6 at 7 {
+ switch0phy6: ethernet-phy at 7 {
reg = <0x7>;
};
- switch0phy7: switch0phy7 at 8 {
+ switch0phy7: ethernet-phy at 8 {
reg = <0x8>;
};
};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad573891..a7678a784c18 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,42 +11,42 @@ &sfp0 {
};
&mdio {
- switch0: switch0 at 4 {
+ switch0: ethernet-switch at 4 {
compatible = "marvell,mv88e6085";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cf_gtr_switch_reset_pins>;
reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port at 1 {
+ ethernet-port at 1 {
reg = <1>;
label = "lan2";
phy-handle = <&switch0phy0>;
};
- port at 2 {
+ ethernet-port at 2 {
reg = <2>;
label = "lan1";
phy-handle = <&switch0phy1>;
};
- port at 3 {
+ ethernet-port at 3 {
reg = <3>;
label = "lan4";
phy-handle = <&switch0phy2>;
};
- port at 4 {
+ ethernet-port at 4 {
reg = <4>;
label = "lan3";
phy-handle = <&switch0phy3>;
};
- port at 5 {
+ ethernet-port at 5 {
reg = <5>;
phy-mode = "2500base-x";
ethernet = <ð1>;
@@ -63,19 +63,19 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0 at 11 {
+ switch0phy0: ethernet-phy at 11 {
reg = <0x11>;
};
- switch0phy1: switch0phy1 at 12 {
+ switch0phy1: ethernet-phy at 12 {
reg = <0x12>;
};
- switch0phy2: switch0phy2 at 13 {
+ switch0phy2: ethernet-phy at 13 {
reg = <0x13>;
};
- switch0phy3: switch0phy3 at 14 {
+ switch0phy3: ethernet-phy at 14 {
reg = <0x14>;
};
};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index fc8216fd9f60..4116ed60f709 100644
--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -158,42 +158,40 @@ nand: nand at 0 {
&mdio {
status = "okay";
- switch at 0 {
+ ethernet-switch at 0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port at 0 {
+ ethernet-port at 0 {
reg = <0>;
label = "lan4";
};
- port at 1 {
+ ethernet-port at 1 {
reg = <1>;
label = "lan3";
};
- port at 2 {
+ ethernet-port at 2 {
reg = <2>;
label = "lan2";
};
- port at 3 {
+ ethernet-port at 3 {
reg = <3>;
label = "lan1";
};
- port at 4 {
+ ethernet-port at 4 {
reg = <4>;
label = "wan";
};
- port at 5 {
+ ethernet-port at 5 {
reg = <5>;
phy-mode = "sgmii";
ethernet = <ð2>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 2d8d319bec83..7b755bb4e4e7 100644
--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -435,12 +435,10 @@ phy1: ethernet-phy at 1 {
};
/* Switch MV88E6176 at address 0x10 */
- switch at 10 {
+ ethernet-switch at 10 {
pinctrl-names = "default";
pinctrl-0 = <&swint_pins>;
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
dsa,member = <0 0>;
reg = <0x10>;
@@ -448,36 +446,36 @@ switch at 10 {
interrupt-parent = <&gpio1>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- ports at 0 {
+ ethernet-port at 0 {
reg = <0>;
label = "lan0";
};
- ports at 1 {
+ ethernet-port at 1 {
reg = <1>;
label = "lan1";
};
- ports at 2 {
+ ethernet-port at 2 {
reg = <2>;
label = "lan2";
};
- ports at 3 {
+ ethernet-port at 3 {
reg = <3>;
label = "lan3";
};
- ports at 4 {
+ ethernet-port at 4 {
reg = <4>;
label = "lan4";
};
- ports at 5 {
+ ethernet-port at 5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@ fixed-link {
};
};
- ports at 6 {
+ ethernet-port at 6 {
reg = <6>;
ethernet = <ð0>;
phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 32c569df142f..3290ccad2374 100644
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -92,44 +92,42 @@ pcie2-0-w-disable-hog {
&mdio {
status = "okay";
- switch at 4 {
+ ethernet-switch at 4 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <4>;
pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
pinctrl-names = "default";
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port at 0 {
+ ethernet-port at 0 {
reg = <0>;
label = "lan5";
};
- port at 1 {
+ ethernet-port at 1 {
reg = <1>;
label = "lan4";
};
- port at 2 {
+ ethernet-port at 2 {
reg = <2>;
label = "lan3";
};
- port at 3 {
+ ethernet-port at 3 {
reg = <3>;
label = "lan2";
};
- port at 4 {
+ ethernet-port at 4 {
reg = <4>;
label = "lan1";
};
- port at 5 {
+ ethernet-port at 5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "1000base-x";
@@ -140,7 +138,7 @@ fixed-link {
};
};
- port at 6 {
+ ethernet-port at 6 {
/* 88E1512 external phy */
reg = <6>;
label = "lan6";
diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 7a0614fd0c93..ea859f7ea042 100644
--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -265,42 +265,40 @@ flash at 0 {
&mdio {
status = "okay";
- switch at 0 {
+ ethernet-switch at 0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port at 0 {
+ ethernet-port at 0 {
reg = <0>;
label = "lan4";
};
- port at 1 {
+ ethernet-port at 1 {
reg = <1>;
label = "lan3";
};
- port at 2 {
+ ethernet-port at 2 {
reg = <2>;
label = "lan2";
};
- port at 3 {
+ ethernet-port at 3 {
reg = <3>;
label = "lan1";
};
- port at 4 {
+ ethernet-port at 4 {
reg = <4>;
label = "internet";
};
- port at 5 {
+ ethernet-port at 5 {
reg = <5>;
phy-mode = "rgmii-id";
ethernet = <ð0>;
--
2.34.1
More information about the linux-arm-kernel
mailing list