[PATCH v1 0/2] imx6/imx8-apalis: add can power-up delay on ixora board

[Andrejs Cainikovs]

From: Andrejs Cainikovs <andrejs.cainikovs at toradex.com>

Newer variants of Ixora boards require a power-up delay when powering up
the CAN transceiver of up to 1ms. This series adds mentioned delay for
iMX6 and iMX8 Apalis SoM variants.

Andrejs Cainikovs (2):
  arm64: dts: imx8-apalis: add can power-up delay on ixora board
  ARM: dts: imx6q-apalis: add can power-up delay on ixora board

 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts     | 2 ++
 arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi | 2 ++
 2 files changed, 4 insertions(+)

-- 
2.34.1