[PATCH 0/2] arm64: dts: allwinner: Add Orange Pi Zero 2W support

[Andre Przywara]

Hi,

this adds support for the Orange Pi Zero 2W, a small board in the
Raspberry Pi Zero form factor, but with an Allwinner H618 Soc and up to
4 GB of DRAM.

This is just for the base board, created by looking at the schematics.
There is an FPC connector, which connects to a stackable expansion
board, that provides two additional USB-A sockets and an Ethernet jack,
among other connectors.
What is the recommended way to model this, via a DT overlay, applied
dynamically by the bootloader, or using a separate .dts file, that
includes this base board file?

Cheers,
Andre

Andre Przywara (2):
  dt-bindings: arm: sunxi: add Orange Pi Zero 2W
  arm64: dts: allwinner: h616: add Orange Pi Zero 2W support

 .../devicetree/bindings/arm/sunxi.yaml        |   5 +
 .../allwinner/sun50i-h618-orangepi-zero2w.dts | 176 ++++++++++++++++++
 2 files changed, 181 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts

-- 
2.25.1