[PATCH] pmdomain: imx: Make imx pgc power domain also set the fwnode

[Pengfei Li]

Currently, The imx pgc power domain doesn't set the fwnode
pointer, which results in supply regulator device can't get
consumer imx pgc power domain device from fwnode when creating
a link.

This causes the driver core to instead try to create a link
between the parent gpc device of imx pgc power domain device and
supply regulator device. However, at this point, the gpc device
has already been bound, and the link creation will fail. So adding
the fwnode pointer to the imx pgc power domain device will fix
this issue.

Signed-off-by: Pengfei Li <pengfei.li_1 at nxp.com>
---
 drivers/pmdomain/imx/gpc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pmdomain/imx/gpc.c b/drivers/pmdomain/imx/gpc.c
index 114f44ca07dd..7d81e3171d39 100644
--- a/drivers/pmdomain/imx/gpc.c
+++ b/drivers/pmdomain/imx/gpc.c
@@ -497,6 +497,7 @@ static int imx_gpc_probe(struct platform_device *pdev)
 
 			pd_pdev->dev.parent = &pdev->dev;
 			pd_pdev->dev.of_node = np;
+			pd_pdev->dev.fwnode = of_fwnode_handle(np);
 
 			ret = platform_device_add(pd_pdev);
 			if (ret) {
-- 
2.34.1