[PATCH] arm64: dts: imx8mp: Add NPU Node

[Adam Ford]

On Thu, Oct 19, 2023 at 1:00 AM Alexander Stein
<alexander.stein at ew.tq-group.com> wrote:
>
> Hi Adam,
>
> thanks for the patch I tried a similar one.
>
> Am Donnerstag, 19. Oktober 2023, 04:23:00 CEST schrieb Adam Ford:
> > The NPU is based on the Vivante GC8000 and it enumerates as
> >
> >  etnaviv-gpu 38500000.npu: model: GC8000, revision: 8002
> >
> > Signed-off-by: Adam Ford <aford173 at gmail.com>
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index
> > c9a610ba4836..1ef8d17726ac 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -2012,6 +2012,25 @@ vpumix_blk_ctrl: blk-ctrl at 38330000 {
> >                       interconnect-names = "g1", "g2", "vc8000e";
> >               };
> >
> > +             npu: npu at 38500000 {
> > +                     compatible = "vivante,gc";
> > +                     reg = <0x38500000 0x20000>;
>
> Do you have some more information about the actual memory range? RM says 2MiB,
> but NPU memory map lists up to 0x664.

I do not. The RM lists 3850_0000 - 386F_FFFF, so I should have put an
extra 0 in there.  Sorry about that.  I will fix in the next rev.
>
> > +                     interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > +                     clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
> > +                              <&clk IMX8MP_CLK_NPU_ROOT>,
> > +                              <&clk IMX8MP_CLK_ML_AXI>,
> > +                              <&clk IMX8MP_CLK_ML_AHB>;
> > +                     clock-names = "core", "shader", "bus", "reg";
> > +                     assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
> > +                               <&clk IMX8MP_CLK_ML_AXI>,
> > +                               <&clk IMX8MP_CLK_ML_AHB>;
> > +                     assigned-clock-parents = <&clk
> IMX8MP_SYS_PLL2_1000M>,
> > +                                      <&clk
> IMX8MP_SYS_PLL1_800M>,
> > +                                      <&clk
> IMX8MP_SYS_PLL1_800M>;
> > +                     assigned-clock-rates = <1000000000>,
> <800000000>, <400000000>;
>
> 1GHz for ML_CLK_ROOT is only available in overdrive mode, 800MHz in nominal
> mode. See datasheet IMX8MPIEC Rev 2.1. I don't think it's a good idea to
> configure for overdrive mode by default.

You are right.  I looked at the clocking from the downstream tree to
see what their clocks were, and it didn't occur to me to double check
against the datasheet.

> Same goes for CLK_ML_AHB regarding 400 vs. 300 MHz.

I'll update both and submit  a V2.

adam
>
> Best regards,
> Alexander
>
> > +                     power-domains = <&pgc_mlmix>;
> > +             };
> > +
> >               gic: interrupt-controller at 38800000 {
> >                       compatible = "arm,gic-v3";
> >                       reg = <0x38800000 0x10000>,
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> http://www.tq-group.com/
>
>