[PATCH 1/1] arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config

[Alexander Stein]

LPUART2_RTS# has an external pull-down, so do not enable the internal
pull-up at the same time, use a pull-down instead.

Fixes: c982ecfa7992a ("arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board")
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 84fdeaaaea443..4d79e05ba9f4b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -605,7 +605,7 @@ pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
 			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
-			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x51e
 		>;
 	};
 
-- 
2.34.1