[PATCH v1 3/3] arm64: dts: mediatek: Add device tree for MT8365-based Pumpkin i350
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Oct 16 14:51:23 PDT 2023
Add a minimal device tree for the Genio i350 Pumpkin development board,
which is based on a MediaTek MT8365.
The device tree is based on an initial version by Fabien Parent Based
written against the MediaTek BSP kernel ([1]). It has been cleaned up,
some features have been added (GPIO LEDs, ethernet), and some features
removed (audio, camera, display and dual-role USB). Those features will
be added back once the corresponding DT bindings and/or drivers become
available in the upstream kernel.
[1] https://gitlab.com/mediatek/aiot/bsp/linux/-/blob/mtk-v5.15-dev/arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts
Co-developed-by: Fabien Parent <fparent at baylibre.com>
Signed-off-by: Fabien Parent <fparent at baylibre.com>
Co-developed-by: Paul Elder <paul.elder at ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder at ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
Changes compared to the BSP version:
- Add ethernet controller
- Add GPIO LEDs
- Add reserved memory region for BL31
- Update board model and compatible
- Rename enable-sdio-wakeup to wakeup-source
- Drop audio support
- Drop display support
- Drop dual role USB support
- Don't use underscores in node names
- Normalize pinmux node names
- Remove unneeded labels
- Drop unneeded always-on
- Drop unused pinmux nodes
- Drop camera GPIO hog
- Update copyright
- Fix formatting
- Sort alphabetically
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../boot/dts/mediatek/mt8365-pumpkin.dts | 542 ++++++++++++++++++
2 files changed, 543 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index c99c3372a4b5..bbc232bdadc4 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -53,4 +53,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-pumpkin.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts
new file mode 100644
index 000000000000..88fa5d19c627
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin.dts
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 BayLibre, SAS.
+ * Copyright (c) 2023 Ideas on Board Oy
+ *
+ * Author: Fabien Parent <fparent at baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+
+#include "mt8365.dtsi"
+#include "mt6357.dtsi"
+
+/ {
+ model = "OLogic Pumpkin i350 EVK";
+ compatible = "ologic,pumpkin-i350", "mediatek,mt8365";
+
+ aliases {
+ ethernet0 = ðernet_usb;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ mmc2 = &mmc2;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-red {
+ gpios = <&gpio_exp 12 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-green {
+ gpios = <&gpio_exp 13 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ };
+ };
+
+ memory at 40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+ secmon at 43000000 {
+ no-map;
+ reg = <0 0x43000000 0 0x30000>;
+ };
+
+ /*
+ * 12 MiB reserved for OP-TEE (BL32)
+ * +-----------------------+ 0x43e0_0000
+ * | SHMEM 2MiB |
+ * +-----------------------+ 0x43c0_0000
+ * | | TA_RAM 8MiB |
+ * + TZDRAM +--------------+ 0x4340_0000
+ * | | TEE_RAM 2MiB |
+ * +-----------------------+ 0x4320_0000
+ */
+ optee at 43200000 {
+ no-map;
+ reg = <0 0x43200000 0 0x00c00000>;
+ };
+ };
+
+ usb_otg_vbus: usb-otg-vbus-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&cpu0 {
+ proc-supply = <&mt6357_vproc_reg>;
+ sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu1 {
+ proc-supply = <&mt6357_vproc_reg>;
+ sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu2 {
+ proc-supply = <&mt6357_vproc_reg>;
+ sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu3 {
+ proc-supply = <&mt6357_vproc_reg>;
+ sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ clock-frequency = <100000>;
+};
+
+&i2c1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <100000>;
+
+ gpio_exp: gpio at 20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ reset-gpios = <&pio 78 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tca6416_pins>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <100000>;
+};
+
+&i2c3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <100000>;
+};
+
+&keypad {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_pins>;
+
+ keypad,num-rows = <2>;
+ keypad,num-columns = <1>;
+ mediatek,debounce-us = <32000>;
+ mediatek,double-keys;
+
+ linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x01, 0x00, KEY_VOLUMEUP)>;
+};
+
+/* eMMC */
+&mmc0 {
+ status = "okay";
+
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+
+ assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
+
+ bus-width = <8>;
+ max-frequency = <200000000>;
+
+ vmmc-supply = <&mt6357_vemc_reg>;
+ vqmmc-supply = <&mt6357_vio18_reg>;
+
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ hs400-ds-delay = <0x12012>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+};
+
+/* SD card connector */
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+
+ bus-width = <4>;
+ max-frequency = <200000000>;
+
+ vmmc-supply = <&mt6357_vmch_reg>;
+ vqmmc-supply = <&mt6357_vmc_reg>;
+
+ cap-sd-highspeed;
+ cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>;
+ sd-uhs-sdr104;
+ sd-uhs-sdr50;
+};
+
+/* WiFi module */
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_uhs>;
+
+ assigned-clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
+
+ bus-width = <4>;
+ max-frequency = <200000000>;
+
+ vmmc-supply = <&mt6357_vemc_reg>;
+ vqmmc-supply = <&mt6357_vio18_reg>;
+
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ wakeup-source;
+ hs400-ds-delay = <0x12012>;
+ keep-power-in-suspend;
+ non-removable;
+ sd-uhs-sdr104;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+};
+
+&mt6357_pmic {
+ interrupt-parent = <&pio>;
+ interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
+
+&pio {
+ i2c0_pins: i2c0-pins {
+ pins {
+ pinmux = <MT8365_PIN_57_SDA0__FUNC_SDA0_0>,
+ <MT8365_PIN_58_SCL0__FUNC_SCL0_0>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ bias-pull-up;
+ };
+ };
+
+
+ i2c1_pins: i2c1-pins {
+ pins {
+ pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
+ <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ bias-pull-up;
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins {
+ pinmux = <MT8365_PIN_61_SDA2__FUNC_SDA2_0>,
+ <MT8365_PIN_62_SCL2__FUNC_SCL2_0>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ bias-pull-up;
+ };
+ };
+
+ i2c3_pins: i2c3-pins {
+ pins {
+ pinmux = <MT8365_PIN_63_SDA3__FUNC_SDA3_0>,
+ <MT8365_PIN_64_SCL3__FUNC_SCL3_0>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ bias-pull-up;
+ };
+ };
+
+ keypad_pins: keypad-pins {
+ pins {
+ pinmux = <MT8365_PIN_22_KPROW0__FUNC_KPROW0>,
+ <MT8365_PIN_23_KPROW1__FUNC_KPROW1>,
+ <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+ };
+ };
+
+ mmc0_pins_default: mmc0-default-pins {
+ clk-pins {
+ pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ cmd-dat-pins {
+ pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ rst-pins {
+ pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins{
+ clk-pins {
+ pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ cmd-dat-pins {
+ pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ ds-pins {
+ pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ rst-pins {
+ pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ cd-pins {
+ pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+ bias-pull-up;
+ };
+
+ clk-pins {
+ pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ cmd-dat-pins {
+ pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1-uhs-pins {
+ cd-pins {
+ pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+ bias-pull-up;
+ };
+
+ clk-pins {
+ pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ cmd-dat-pins {
+ pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_6mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc2_pins_default: mmc2-default-pins {
+ clk-pins {
+ pinmux = <MT8365_PIN_81_MSDC2_CLK__FUNC_MSDC2_CLK>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ cmd-dat-pins {
+ pinmux = <MT8365_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0>,
+ <MT8365_PIN_83_MSDC2_DAT1__FUNC_MSDC2_DAT1>,
+ <MT8365_PIN_84_MSDC2_DAT2__FUNC_MSDC2_DAT2>,
+ <MT8365_PIN_85_MSDC2_DAT3__FUNC_MSDC2_DAT3>,
+ <MT8365_PIN_80_MSDC2_CMD__FUNC_MSDC2_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ sysrstb-en-pins {
+ pinmux = <MT8365_PIN_74_CMDAT6__FUNC_GPIO74>;
+ output-low;
+ };
+ };
+
+ mmc2_pins_uhs: mmc2-uhs-pins {
+ clk-pins {
+ pinmux = <MT8365_PIN_81_MSDC2_CLK__FUNC_MSDC2_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ cmd-dat-pins {
+ pinmux = <MT8365_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0>,
+ <MT8365_PIN_83_MSDC2_DAT1__FUNC_MSDC2_DAT1>,
+ <MT8365_PIN_84_MSDC2_DAT2__FUNC_MSDC2_DAT2>,
+ <MT8365_PIN_85_MSDC2_DAT3__FUNC_MSDC2_DAT3>,
+ <MT8365_PIN_80_MSDC2_CMD__FUNC_MSDC2_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ ds-pins {
+ pinmux = <MT8365_PIN_86_MSDC2_DSL__FUNC_MSDC2_DSL>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ sysrstb-en-pins {
+ pinmux = <MT8365_PIN_126_DMIC3_CLK__FUNC_GPIO126>;
+ output-high;
+ };
+ };
+
+ tca6416_pins: tca6416-pins {
+ rst-n-pins {
+ pinmux = <MT8365_PIN_78_CMHSYNC__FUNC_GPIO78>;
+ output-high;
+ };
+
+ int-n-pins {
+ pinmux = <MT8365_PIN_79_CMVSYNC__FUNC_GPIO79>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ usb_pins: usb-pins {
+ hub-rst-pins {
+ pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>;
+ output-low;
+ };
+
+ id-pins {
+ pinmux = <MT8365_PIN_39_URXD2__FUNC_GPIO39>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ vbus-pins {
+ pinmux = <MT8365_PIN_25_KPCOL1__FUNC_USB_DRVVBUS>;
+ };
+ };
+};
+
+&ssusb {
+ status = "okay";
+
+ pinctrl-0 = <&usb_pins>;
+ pinctrl-names = "default";
+
+ /* Host mode only for now, TUSB322 support is missing. */
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ vusb33-supply = <&mt6357_vusb33_reg>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb_host {
+ status = "okay";
+
+ vusb33-supply = <&mt6357_vusb33_reg>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub at 2 {
+ reg = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet_usb: ethernet at 1 {
+ compatible = "usb424,ec00";
+ reg = <1>;
+ };
+ };
+};
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list